Heres my .prf file

thanx for the help so far kdyer

//Matt

; Outlook PRF file for Exchange Server users
; -------------------------------------------
; Copyright (C), Microsoft Corporation, 1996.
;
; The following PRF file is included as an example of how to create a PRF file that will
; configure Outlook users with Exchange Server. Section 1, 2, and 3 may be modified.
; DO NOT MODIFY SECTION 4. It will most likely cause Exchange services to crash.
; Be very careful when editing to ensure property values match their property types.
; NOTE: The HomeServer setting for the Microsoft Exchange Server must be filled in
; before using this file.
;
; For information about how to disable Outlook Profile Setup and instead use the
; the Inbox Setup Wizard, see NONE.PRF in the Office Resource Kit.

; ************************************************************************
; Section 1 - Profile defaults.

[General]
Custom=1
; -- Required. Indicates that this is a customized PRF file.
ProfileName=%username%
DefaultProfile=Yes
OverwriteProfile=Yes
DefaultStore=Service2

; ************************************************************************
; Section 2 - Services in profile.

[Service List]
Service1=Microsoft Outlook Client
Service2=Microsoft Exchange Server
Service3=Outlook Address Book
Service4=Personal Address Book
Service5=Archived Messages

; ************************************************************************
; Section 3 - Default values for each service.

[Service1]
EmptyWastebasket=TRUE
SelectEntireWord=TRUE
AfterMoveMessage=2
CloseOriginalMessage=FALSE
GenReadReceipt=FALSE
GenDeliveryReceipt=FALSE
DefaultSensitivity=0
DefaultPriority=1
SaveSentMail=TRUE

; **** Customized Outlook Client properties ****
CloseOriginalMsg=1
AllowCommaAsSeparator=1
MarkMyComments=0
AutoArchiveInterval=5
DefaultArchiveFile=H:\Outlook\%username%.pst

[Service2]
ConversionProhibited=TRUE
MailboxName=%username%
HomeServer=lab1
; Required.
; -- The name of the Microsoft Exchange Server the user should
; connect to (ex: ALEX). You can specify any Microsoft Exchange Server
; in your site, and the correct Home Server will be assigned
; when the user first logs on.

[Service3]
Ben=TRUE
; -- Dummy property. Do not delete or modify.

[Service4]
PathToPersonalAddressBook="H:\Outlook\%username%.pab"
ViewOrder=1

[Service5]
PathToPersonalFolders="H:\Outlook\%username%.pst"
RememberPassword=TRUE
EncryptionType=0x40000000
Password=

; ************************************************************************
; Section 4 - Mapping for profile properties. DO NOT MODIFY.

; ************************************************************************
; Microsoft Outlook Client definitions

[Microsoft Outlook Client]
SectionGUID=0a0d020000000000c000000000000046

EmptyWastebasket=PT_BOOLEAN,0x0115
; -- A boolean value indicating whether or not to empty the
; wastebasket on exit.

SelectEntireWord=PT_BOOLEAN,0x0118
; -- A boolean value indicating whether or not to select entire
; words when selecting.

AfterMoveMessage=PT_LONG,0x013B
; -- Indicates what to do after moving or deleting a message.
; Possible values are shown below:
; 0 - Open Next Message
; 1 - Return to Viewer
; 2 - Open Previous Message

CloseOriginalMessage=PT_BOOLEAN,0x0132
; -- A boolean value indicating whether or not to close the
; original message after replying.

GenReadReceipt=PT_BOOLEAN,0x0141
; -- A boolean value indicating whether or not to generate
; a read receipt on sent mail.

GenDeliveryReceipt=PT_BOOLEAN,0x014C
; -- A boolean value indicating whether or not to generate
; a delivery receipt on sent mail.

DefaultSensitivity=PT_LONG,0x014F
; -- The default sensitivity to send mail with.
; Possible values are shown below:
; 0 - Normal
; 1 - Personal
; 2 - Private
; 3 - Confidential

DefaultPriority=PT_LONG,0x0140
; -- The default priority to send mail with.
; Possible values are shown below:
; 0 - Low
; 1 - Normal
; 2 - High

SaveSentMail=PT_BOOLEAN,0x0142
; -- A boolean value indicating whether to save a copy of
; sent messages in the sent items folder.

; **** Custom entries added by rickva@microsoft.com ****

CloseOriginalMsg=PT_BOOLEAN,0x0132
; -- A boolean value indicating whether Outlook should close original
; message when replying or forwarding.

MarkMyComments=PT_BOOLEAN,0x0319
; -- A boolean value indicating whether Outlook should mark comments
; in a reply message with the users name.

AllowCommaAsSeparator=PT_BOOLEAN,0x0350
; -- A boolean value indicating whether Outlook should allow a comma
; to be used as an address separator.

AutoArchiveInterval=PT_LONG,0x0323
; -- The default is to auto archive every 14 days.
; Possible values are shown below:
; 1 - 60

DefaultArchiveFile=PT_STRING8,0x0324
; -- The path and file name for the default auto archive file.
; ex: c:\home\rickva\outlook\archive.pst

; ************************************************************************
; Microsoft Exchange Server service definitions.

[Microsoft Exchange Server]
ServiceName=MSEMS
MDBGUID=5494A1C0297F101BA58708002B2A2517

MailboxName=PT_STRING8,0x6607
; -- The name of the user's Exchange Server Mailbox

HomeServer=PT_STRING8,0x6608
; -- The name of the Microsoft Exchange Server the user should
; connect to. You can specify any Microsoft Exchange Server
; in your site, and the correct Home Server will be assigned
; when the user first logs on.

OfflineFolderPath=PT_STRING8,0x6610
; -- The path to the Offline Store File that contains
; local replicas of the user's Mailbox and Favorites.
; If you do not specify a value, no Offline Store will
; be created. If you specify a path, an Offline Store
; will be created and the Inbox, Outbox, Deleted Items,
; and Sent Items folders will be replicated to it.

OfflineAddressBookPath=PT_STRING8,0x660E
; -- The path to the directory to store offline address
; book files in.

ExchangeConfigFlags=PT_LONG,0x6601
; -- Flags that control behavior when connecting to the Exchange
; Server.
; The following values are possible:
; VALUE RESULT
; 4 Normal
; 6 Ask whether to connect or work offline at startup.
; 12 Allow clients to be authenticated via the Internet
; 14 Combination of 6 and 12.

ConversionProhibited=PT_BOOLEAN,0x3A03
; -- A boolean value indicating whether NEWPROF should
; attempt to resolve the Exchange mailbox name at run time.
; If set to TRUE, NEWPROF will copy the name to the profile
; without resolving it.
; If FALSE, the name will be resolved. Invalid server or
; mailbox name will not be copied to the profile.

; ************************************************************************
; Microsoft Mail service definitions.

[Microsoft Mail]
ServiceName=MSFS

; -- The path to the users post office. Mapped network drives, UNC and NETWARE paths
; are acceptable. NETWARE paths of the type NWServer/share:dir\dir1 are converted to
; UNC paths of the type \\NWServer\share\dir\dir1.

ServerPath=PT_STRING8,0x6600

; -- The users mailbox name. eg. in a NET/PO/USER address,
; this is USER. The maximum mailbox name is 10 characters.

Mailbox=PT_STRING8,0x6601

; -- The users mailbox password. The maximum password is 8 characters.

Password=PT_STRING8,0x67f0

; -- A boolean value indicating whether the users password is
; to be remembered in the profile or not. This is useful because
; if the password is remembered the user can bypass the logon prompt
; if his server path, mailbox name and password are all supplied.

RememberPassword=PT_BOOLEAN,0x6606

; -- The connection type. This may be one of CFG_CONN_AUTO, CFG_CONN_LAN,
; CFG_CONN_REMOTE, CFG_CONN_OFFLINE as defined below.
;
; 0x0 -- LAN type connection. Used to connect to the post office using a
; UNC path or pre-existing mapped drive.
; 0x1 -- Dial up connection using Dial-up Networking.
; 0x2 -- Not connected.
; 0x3 -- Automatically detect whether the connection type is LAN or REMOTE.
; This connection type is only available on Win95.

ConnectionType=PT_LONG,0x6603

; -- A boolean value indicating whether session logging
; is on or off.

UseSessionLog=PT_BOOLEAN,0x6604

; -- The path to the session log file.

SessionLogPath=PT_STRING8,0x6605

; -- A boolean value which indicates whether mail in the outbox
; is sent.

EnableUpload=PT_BOOLEAN,0x6620

; -- A boolean value which indicates whether mail in the server
; mailbag is downloaded.

EnableDownload=PT_BOOLEAN,0x6621

; -- A bit array which allows the user to indicate which addresses
; for which the transport is to attempt delivery. This is useful
; in order to allow a user to specify that a transport only handle
; delivery for a subset of the addresses it can really process.
; When multiple transports are installed and the user wants a
; different transport to handle some specific address types they
; can use this bit array to specify that the MSMAIL transport
; only handle a specific set of addresses.
;
; Possible values as defined below include:
;
; 0x00000001 -- Local Post Office and External Post Office address types
; 0x00000002 -- PROFS address types
; 0x00000004 -- SNADS address types
; 0x00000008 -- MCI address types
; 0x00000010 -- X.400 address types
; 0x00000040 -- FAX address types
; 0x00000080 -- MHS address types
; 0x00000100 -- SMTP address types
; 0x00000800 -- OfficeVision address types
; 0x00001000 -- MacMail address types
; 0x000019df -- All of the above address types

UploadMask=PT_LONG,0x6622

; -- A boolean value which indicates whether a netbios notification
; is sent to a recipients transport when mail is delivered to
; their server inbox.

NetBiosNotification=PT_BOOLEAN,0x6623

; -- The polling interval in minutes when the transport
; checks for new mail. 1 <= polling interval <= 9999

NewMailPollInterval=PT_STRING8,0x6624

; -- A boolean value which, if TRUE, only displays the Microsoft Mail Global Address
; list for name selection. The Postoffice list, external post office lists, and gateway
; address lists are not shown.

DisplayGalOnly=PT_BOOLEAN,0x6625

; -- A boolean value which indicates whether the user wants to enable
; headers while working on the LAN. Headers mode allows the user
; to download message headers and selectively choose which mail
; to download.

UseHeadersOnLAN=PT_BOOLEAN,0x6630

; -- A boolean value which indicates whether the user wants to use
; name resolution based on a local copy of the server address book
; rather than the server address book itself.

UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631

; -- A boolean value which indicates whether EXTERNAL.EXE, a server process, should be used
; to deliver submitted mail messages. This is sometimes useful when mail is running
; on a slow LAN connection.

UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632

; -- A boolean value which indicates whether the user wants to enable
; headers while working over a slow speed link. Headers mode
; allows the user to download message headers and selectively
; choose which mail to download.

UseHeadersOnRAS=PT_BOOLEAN,0x6640

; -- A boolean value which indicates whether the user wants to use
; name resolution based on a local copy of the server address book
; rather than the server address book itself.

UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641

; -- A boolean value which indicates whether EXTERNAL.EXE, a server process, should be used
; to deliver submitted mail messages. This speeds up message delivery when mail is
; running on a Dial-up network connection.

UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639

; -- A boolean value which indicates that a Dial-up Network connection should
; be established when the transport provider starts up.

ConnectOnStartup=PT_BOOLEAN,0x6642

; -- A boolean value which indicates that a Dial-up Network connection should
; be automatically terminated when headers are finished downloading.

DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643

; -- A boolean value which indicates that a Dial-up Network connection should
; be automatically terminated after mail has finished being sent
; received.

DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644

; -- A boolean value which indicates that a Dial-up Network connection should
; be automatically terminated when the provider is exited.

DisconnectOnExit=PT_BOOLEAN,0x6645

; -- The name of the Dial-up Network profile that the transport will use by
; default to attempt the connection.

DefaultDialupConnectionName=PT_STRING8,0x6646

; -- Number of times to attempt dial for connection.
; 1 <= retry attempts <= 9999

DialupRetryCount=PT_STRING8,0x6648

; -- Delay between retry attempts in seconds.
; 30 <= retry delay <= 9999

DialupRetryDelay=PT_STRING8,0x6649

; ************************************************************************
; Personal Folders service definitions.

[Archived Messages]
ServiceName=MSPST MS

; -- Path to personal folders.

PathToPersonalFolders=PT_STRING8,0x6700

; -- A boolean value that determines if the personal folders password
; should be cached.

RememberPassword=PT_BOOLEAN,0x6701

; -- A value that designates the type of encryption that is used to
; compress the data in the PST:
;
; No Encryption 0x80000000
; Compressable Encryption 0x40000000
; Best Encryption 0x20000000

EncryptionType=PT_LONG,0x6702

; -- PST password.

Password=PT_STRING8,0x6703

; ************************************************************************
; Personal Address Book service definitions.

[Personal Address Book]
ServiceName=MSPST AB

; -- Path to personal address book.

PathToPersonalAddressBook=PT_STRING8,0x6600

; -- Determines if PAB entries are first, last, or last, first.
;
; first last 0
; last, first 1

ViewOrder=PT_LONG,0x6601

; ************************************************************************
; Outlook Address Book service definitions.

[Outlook Address Book]
ServiceName=CONTAB
Ben=PT_STRING8,0x6700
; -- Dummy property. Do not modify.