code:

---

 Verifying / Updating Script Software Installation, Please Wait...
Loading Logon Script, Please Wait...
        ;Set this line to = the name of the config file

;****************************************************************************

;----------------------------------------------------------------------------
;               Do not edit below this Point.
;
; (only if you really really know what you are doing!  Everything that this
; script can do is controlled by the Config file!)
;----------------------------------------------------------------------------
;****************************************************************************


select
        case 1 = 2
                $Configregkey = HKEY_LOCAL_MACHINE\SOFTWARE\Logon_Script
        case 1 = 1
496-1129\logon_scriptigregkey = HKEY_USERS\S-1-5-21-673135436-1833650376-2076119
endselect


;----------------------------------------------------------------------------
;  This is where all Global variables are set

$ =
$cr = chr(13)+chr(10)   $lf = chr(10)
$tab = chr(9)           ;$ip = enumipinfo()

M(SUBSTR(192.168. 10. 20,9,4))+LTRIM(SUBSTR(192.168. 10. 20,13,4)) 20,5,4))+LTRI

;loading Kix2001 Programming Functiuons
call logon.bat\..\ + 'functions\Kix_Functions'

;loading user defined Custom variables
call logon.bat\..\ + 'functions\Custom_Variables'
;----------------------------------------------------------------------------

Select
        case readprofilestring(C:\Kix_Logon_script\config.ini,,) =
                ? Script error : unknown command !
                ? "ERROR READING $ConfigFile!!!" 

---

code:

---

 Verifying / Updating Script Software Installation, Please Wait...
Loading Logon Script, Please Wait...

C:\Kix_Logon_script> 

---

code:

---

 C:\Kix_Logon_script>kix32 logon.kix

ERROR READING Config.ini!!!
C:\Kix_Logon_script> 

---

code:

---

 	select
		case Ubound($data) <> 2
			? "There is an error in the config.ini"
		case 1
			$Module      = $data[2]
			$Mstatus     = readvalue("$ConfigRegkey\$Module","Status")
			? "Runpath: " $runpath
			? "ModuleLib: " $ModuleLib
			? "Module: " $Module
			IF OS($data[0]) = 1 AND GroupCode($data[1]) = 1 AND $Mstatus = "on"
				call $runpath$ModuleLib$Module
			endif
	endselect	 

---

code:

---

 Runpath: logon.bat\..\
ModuleLib: modules\
Module: CTRL_C  

---

I'm not sure, but the runpath looks strange to me - is this correct ?!?

ah wait - I placed an ? here

code:

---

 IF OS($data[0]) = 1 AND GroupCode($data[1]) = 1 AND $Mstatus = "on"
				call $runpath$ModuleLib$Module
				? $runpath$ModuleLib$Module
			endif 

---

code:

---

	l = local groups
		|L!Administrators|		would be only for users that have local admin
		|L!\\server\group|		Would check for membership in a Local group on 
						a remote computer

	G = Global groups
		|G!Domain Admins|		would only execute for users in the "Domain Admins"
						global group

		|G!MIS\users|			Will only execute if a member of the trusted domain
						"MIS" and in the global Users of that domain

		|G!?user|			Will search all global groups using "user" as a wild card

	U = Username
		|U!smithb|			would only execute for user smithb

	W = Workstation name
		|W!testcomputer1|		would only execute if ran on "testcomputer1"

	I = ip#	
		|I!128.2.0.0/255.255.0.0|	would only execute for computers in the 128.2.0.0 subnet
		|I!128.2.10.11/255.255.255.255|	would only execute for the ipaddress 128.2.10.11

---

code:

---

 C:\Kix_Logon_script>kix32 logon.kix $runpath="%0\..\\"
 

---

code:

---

 IF OS($data[0]) = 1 AND GroupCode($data[1]) = 1 AND $Mstatus = "on"
				call "$runpath$ModuleLib$Module"
				? $Mstatus  GroupCode($data[1]) OS($data[0])
				? "XX: "$runpath$ModuleLib$Module
			endif 

---

call didn't fire up the modules, but at least it came into this IF (because of the w!myworkstation )

from there, it was just a small step to the manual for the "call" command, and see there - I removed the " around the command yesterday, just because I discovered somewhere else that it might help (it helped at the other place, can't remember exactly where right now, but it runs with the " and without them...
so, i just put them into place - and it runs ! !

thnks a lot to bryce for his patience and everything ! ! !

owe you a beer

.Ralph

quote:

---

what did you have in the config.ini file before you changed it?

---