Could a kind person with access to a win2k computer that has multiple network interface please run the following, and post it here?

netsh interface show interface

This is what i get on my single network interface win2k computer

code:

---

Admin State    State          Type             Interface Name
-------------------------------------------------------------------------
Enabled                       Dedicated        Local Area Connection
Enabled                       Internal         Internal
Enabled                       Loopback         Loopback

---

I am hoping that dialup and ras connections will be displayed as well.

Thanks!
Bryce

[This message has been edited by Bryce (edited 30 January 2001).]

I would be happy to help you, but where is da code?

------------------
Cheers....

David

netsh interface show interface

After some testing on my home computer I think that this will only show network cards and not any dialup connections.

If you have a multi homed win2k computer, i still would like to see what the result is.

Bryce

Here's what I've got on my laptop. The one below the Xircom comes up as a 3com NIC which was most likely from when I used a foreign dock.

Hope this helps

code:

---

Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.
C:\>netsh interface show interface
Admin State    State          Type             Interface Name
-------------------------------------------------------------------------
Enabled                       Dedicated        Xircom
Enabled                       Dedicated        {B5303C61-9A01-4E46-AC92-66289DE2
B4C1}
Enabled                       Dedicated        Dock
Enabled                       Internal         Internal
Enabled                       Loopback         Loopback
C:\>

---

------------------

"He was a good little monkey and always very curious..."