You are not logged in. [Log In] KiXtart.org website » Forums » KiXtart » Basic Scripting » runnas +1 incorrect function
Register User       Forum List       Calendar       FAQ
Page 1 of 1 1
Topic Options
#212503 - 2017-05-10 11:01 PM runnas +1 incorrect function
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
I am trying to install a program from the network with elevated credentials. I am getting an error and am not having any luck finding a solution. Has anyone ran runnas and executed a network program? Does it need to be copied to the local pc and ran from there?


Map Error was execute: \\DC01\netlogon\sms\client.bat + 1 - Incorrect function.


 Code:
$network="@lserver\netlogon\programs\client.bat"
if @error<>0 'Map Error was server: '$network '+ ' + @ERROR + ' - ' + @SERROR ?    endif

$runaspath="@lserver\netlogon\runnas.exe"
if @error<>0 'Map Error was runaspath: ' $runaspath ' + ' + @ERROR + ' - ' + @SERROR ?    endif

shell $runaspath + ' user:domain\helpdesk' +' $network' + ' /pass:password'
if @error<>0 'Map Error was execute: ' + @ERROR + ' - ' + @SERROR ?    endif



Edited by tjcarst (2017-05-11 12:12 AM)
Edit Reason: Correct typo in title
Top
#212505 - 2017-05-11 03:50 PM Re: runnas +1 incorrect function [Re: tjcarst]
ShaneEP Moderator Offline
MM club member
*****

Registered: 2002-11-29
Posts: 2127
Loc: Tulsa, OK
Some of you "'"s looked a little wonky. Give this a shot. I also suggest always adding NoMacrosInString and NoVarsInStrings to your scipts which forces better coding practices (at least in my opinion).

 Code:
$nul = SetOption("NoVarsInStrings", "On")
$nul = SetOption("NoMacrosInStrings", "On")

$network = @lserver + "\netlogon\programs\client.bat"

if @error<>0
   'Map Error was server: ' + $network + ' ' + @ERROR + ' - ' + @SERROR ?
endif

$runaspath = @lserver + "\netlogon\runnas.exe"

if @error<>0
   'Map Error was runaspath: ' + $runaspath + ' ' + @ERROR + ' - ' + @SERROR ?
endif

shell '"' + $runaspath + ' user:domain\helpdesk ' + $network + ' /pass:password"'

if @error<>0
   'Map Error was execute: ' + @ERROR + ' - ' + @SERROR ?
endif
Top
#212506 - 2017-05-11 04:40 PM Re: runnas +1 incorrect function [Re: ShaneEP]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
Thank you, ShaneEP.

I get an error on the execute when using the new code:

Map Error was winpath: 0 - The operation completed successfully.
Map Error was execute: 2 - The system cannot find the file specified.
Top
#212507 - 2017-05-11 05:18 PM Re: runnas +1 incorrect function [Re: tjcarst]
ShaneEP Moderator Offline
MM club member
*****

Registered: 2002-11-29
Posts: 2127
Loc: Tulsa, OK
Hmm..Try this one.
 Code:
$nul = SetOption("NoVarsInStrings", "On")
$nul = SetOption("NoMacrosInStrings", "On")

$network = @lserver + "\netlogon\programs\client.bat"

if @error<>0
   'Map Error was server: ' + $network + ' ' + @ERROR + ' - ' + @SERROR ?
endif

$runaspath = @lserver + "\netlogon\runnas.exe"

if @error<>0
   'Map Error was runaspath: ' + $runaspath + ' ' + @ERROR + ' - ' + @SERROR ?
endif

$cmd = '"' + $runaspath + '" user:domain\helpdesk "' + $network + '" /pass:password'
Shell $cmd

if @error<>0
   'Map Error was execute: ' + @ERROR + ' - ' + @SERROR ?
endif
Top
#212508 - 2017-05-11 05:33 PM Re: runnas +1 incorrect function [Re: ShaneEP]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
It is returning the correct path to runnas.exe and the network location.

ERROR : Error in expression.!

Perhaps I need to run runnas.exe from a mapped drive?

I do appreciate the assistance, ShaneEP.
Top
#212509 - 2017-05-11 05:43 PM Re: runnas +1 incorrect function [Re: tjcarst]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
I had an error in the if error line. Fixed that.

Now I have

RUNNAS: The system cannot find the file specified.
Top
#212510 - 2017-05-11 05:48 PM Re: runnas +1 incorrect function [Re: tjcarst]
ShaneEP Moderator Offline
MM club member
*****

Registered: 2002-11-29
Posts: 2127
Loc: Tulsa, OK
If you hard code the runas command instead of using variables, does it work? I'm thinking it's still a quotation problem, but it would be nice to make sure.
 Code:
$cmd = '"\\server\netlogon\runnas.exe" user:domain\helpdesk "\\server\netlogon\programs\client.bat" /pass:password'

Also, does it work if you just type the command into the command prompt?

Edited by ShaneEP (2017-05-11 05:49 PM)
Top
#212511 - 2017-05-11 05:49 PM Re: runnas +1 incorrect function [Re: tjcarst]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
 Code:
$nul = SetOption("NoVarsInStrings", "On")
$nul = SetOption("NoMacrosInStrings", "On")
$network="@lserver\netlogon\sms\client.bat"
if @error<>0 'Map Error was server: ' + $network + ' ' + @ERROR + ' - ' + @SERROR ? endif
;$runaspath = @lserver + "\netlogon\runnas.exe"
$runaspath = "@lserver\netlogon\runnas.exe"
if @error<>0 'Map Error was runaspath: ' + $runaspath + ' ' + @ERROR + ' - ' + @SERROR ? endif
$cmd = '"' + $runaspath + '" user:domain\helpdesk "' + $network + '" /pass:password'
Shell $cmd
if @error<>0 'Map Error was execute: ' + @ERROR + ' - ' + @SERROR ? endif
$network + '  ' + $runaspath


Map Error was execute: 2 - The system cannot find the file specified.
@lserver\netlogon\sms\client.bat @lserver\netlogon\runnas.exe

I have verified client.bat is in that location.

Edited by ShaneEP (2017-05-11 05:50 PM)
Top
#212512 - 2017-05-12 09:04 AM Re: runnas +1 incorrect function [Re: tjcarst]
mole Offline
Getting the hang of it

Registered: 2003-01-01
Posts: 81
Loc: Indian Head, Maryland, USA
You have specified no macros in strings but have a macro in a string (see the macro wrapped in quotes in second line pasted from your code):

$nul = SetOption("NoMacrosInStrings", "On")
$network="@lserver\netlogon\sms\client.bat"

Instead do this:

$network=@lserver+"\netlogon\sms\client.bat"

...and also later:

$runaspath=@lserver+"\netlogon\runnas.exe"
_________________________
mole

Who is John Galt?

Top
#212514 - 2017-05-12 03:19 PM Re: runnas +1 incorrect function [Re: mole]
ShaneEP Moderator Offline
MM club member
*****

Registered: 2002-11-29
Posts: 2127
Loc: Tulsa, OK
Yea good catch Mole. I had just assumed he copied the code as I had posted it for him. But guess not.
Top
#212515 - 2017-05-12 05:00 PM Re: runnas +1 incorrect function [Re: ShaneEP]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
I have tried several variations.

The script does return the correct path to runnas.exe on netlogon, and to client.bat whether client.bat is on the netlogon root, netlogon\sms or a mapped drive.

Here is the error I get using code below.

Map Error was execute: 1 - Incorrect function.
\\ADS02\netlogon\sms\client.bat \\ADS02\netlogon\runnas.exe

 Code:
nul = SetOption("NoVarsInStrings", "On")
$nul = SetOption("NoMacrosInStrings", "On")

$network=@lserver+"\netlogon\sms\client.bat"

if @error<>0 'Map Error was server: ' + $network + ' ' + @ERROR + ' - ' + @SERROR ? endif

$runaspath = @lserver + "\netlogon\runnas.exe"

if @error<>0 'Map Error was runaspath: ' + $runaspath + ' ' + @ERROR + ' - ' + @SERROR ? endif

$cmd = '"' + $runaspath + '" user:domain\helpdesk "' + $network + '" /pass:password'
Shell $cmd

if @error<>0 'Map Error was execute: ' + @ERROR + ' - ' + @SERROR ? endif
$network + '  ' + $runaspath

Top
#212516 - 2017-05-12 05:15 PM Re: runnas +1 incorrect function [Re: tjcarst]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
I tried using a domain admin account just now, thinking perhaps it was a permissions issue. Same error.

 Code:
\\ADS02\netlogon\sms\client.bat  \\ADS02\netlogon\runnas.exe


The account I am using is a local admin account on the workstations. I am trying to install software using the logon script with elevated permissions.
Top
#212519 - 2017-05-12 07:20 PM Re: runnas +1 incorrect function [Re: tjcarst]
ShaneEP Moderator Offline
MM club member
*****

Registered: 2002-11-29
Posts: 2127
Loc: Tulsa, OK
Can you get it work by typing the command straight into a command prompt?
Top
#212520 - 2017-05-12 07:31 PM Re: runnas +1 incorrect function [Re: ShaneEP]
ShaneEP Moderator Offline
MM club member
*****

Registered: 2002-11-29
Posts: 2127
Loc: Tulsa, OK
Also...Does anyone have a copy of the runnas.exe they could host somewhere? Might be easier to figure out that right strokes, if I had it to test with.
Top
#212521 - 2017-05-13 07:45 PM Re: runnas +1 incorrect function [Re: ShaneEP]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
I downloaded runnas.exe from the kixtart forums. Shawn posted it. I cannot find it now.
Top
#212522 - 2017-05-13 08:16 PM Re: runnas +1 incorrect function [Re: tjcarst]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
Does not work from command line. I tried running from mapped drive and UNC path.

I am thinking this is related to client.bat.

client.msi will run if I execute it. client.bat brings up windows showing switch usage.

I am going to mess with the client.bat file and try using msiexec and passing the msi and switches.


RUNNAS 1.14

Contents of client.bat
 Code:
client.msi /n /norestart /a /p


net use
OK U: \\sms02\smsclient\i386 Microsoft Windows Network
OK X: \\ads03\netlogon Microsoft Windows Network

Contents of \\ads02\netlogon\sms mapped to X:

X:\sms>dir
Volume in drive X is DB_SysVol
Volume Serial Number is 8AC5-D38B

Directory of X:\sms

05/12/2017 09:48 AM .
05/12/2017 09:48 AM ..
04/13/2007 02:50 AM 99,704 capinst.exe
11/02/2004 10:42 AM 266,240 ccmclean.exe
04/13/2007 02:50 AM 271,224 ccmsetup.exe
05/10/2017 11:24 AM 30 client.bat
04/13/2007 02:50 AM 7,471,104 client.msi
5 File(s) 8,108,302 bytes
2 Dir(s) 145,556,164,608 bytes free

Contents of \\sms02\smsapps\i386 mapped to U:

U:\>dir
Volume in drive U is DATA
Volume Serial Number is A468-E98D

Directory of U:\

05/10/2017 11:24 AM .
05/10/2017 11:24 AM ..
04/13/2007 02:50 AM 99,704 capinst.exe
11/02/2004 10:42 AM 266,240 ccmclean.exe
04/13/2007 02:50 AM 271,224 ccmsetup.exe
05/11/2017 10:54 AM 30 client.bat
04/13/2007 02:50 AM 7,471,104 client.msi
04/13/2007 02:50 AM 550,264 smsman.exe
8 File(s) 8,658,719 bytes
2 Dir(s) 51,710,730,240 bytes free


X:\> runnas.exe "\\ads02\netlogon\sms\client.msi /n /norestart /a /p"
RUNNAS: The system cannot find the path specified.

X:\> runnas.exe "\\sms02\smsapps\i386\client.msi /n /norestart /a /p"
RUNNAS: The system cannot find the path specified.

X:\> runnas.exe "u:\i386\client.msi" /n /norestart /a /p
RUNNAS: The system cannot find the path specified.

U:\client.bat returns:

Windows ® Installer. V 5.0.7601.23593

msiexec /Option [Optional Parameter]

Install Options

Installs or configures a product
/a
Administrative install - Installs a product on the network
/j [/t ] [/g ]
Advertises a product - m to all users, u to current user

Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*]
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log
Equivalent of /l*
Update Options
/update [;Update2.msp]
Applies update(s)
/uninstall [;Update2.msp] /package
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v]
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]

Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.

Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.
Top
#212523 - 2017-05-13 09:22 PM Re: runnas +1 incorrect function [Re: tjcarst]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
I have the batch file running when I execute it from command line, but I still get an error when running from kix.

Map Error was execute: 1 - Incorrect function.
\\ADS02\netlogon\sms\client.bat \\ADS02\netlogon\runnas.exe

client.bat runs from command prompt

msiexec /i "client.msi" /n /quiet /norestart

smsclient.kix

 Code:

$nul = SetOption("NoVarsInStrings", "On")
$nul = SetOption("NoMacrosInStrings", "On")

$network=@lserver+"\netlogon\sms\client.bat"

if @error<>0 'Map Error was server: ' + $network + ' ' + @ERROR + ' - ' + @SERRO
R ? endif

$runaspath = @lserver + "\netlogon\runnas.exe"

if @error<>0 'Map Error was runaspath: ' + $runaspath + ' ' + @ERROR + ' - ' + @
SERROR ? endif

$cmd = '"' + $runaspath + '" user:domain\helpdesk "' + $network + '" /pass:password'
Shell $cmd

if @error<>0 'Map Error was execute: ' + @ERROR + ' - ' + @SERROR ? endif
$network + '  ' + $runaspath

Top
#212524 - 2017-05-13 09:52 PM Re: runnas +1 incorrect function [Re: tjcarst]
Allen Administrator Offline
KiX Supporter
*****

Registered: 2003-04-19
Posts: 4573
Loc: USA
This script seems a little over complicated to me. Can you post the contents of the batch file?

I could be wrong but you might also be running to into permissions issues while trying to run runnas across the network.

Might also suggest running %comspec% /c client.bat and see if you get anywhere with that.
_________________________
(... better days ahead)

Top
#212525 - 2017-05-13 09:57 PM Re: runnas +1 incorrect function [Re: tjcarst]
tjcarst Offline
Hey THIS is FUN

Registered: 2003-09-08
Posts: 243
Loc: USA
OMG :-( IT is always something little that take so much time to figure out.

The / was missing from in front of user

/user:domain\helpdesk

I should have been displaying all variables including $user and $password.

My program still is not running, but runnas is no longer returning an error.

Thanks for your assistance ShaneEP and Mole.
Top
Page 1 of 1 1


Moderator:  Jochen, Allen, Radimus, Glenn Barnas, ShaneEP, Ruud van Velsen, Arend_, Mart 
Hop to:
Shout Box

Who's Online
0 registered and 1343 anonymous users online.
details
Newest Members
Viginette, ManuvdWielNL, Sir_Barrington, batdk82, StuTheCoder
17888 Registered Users
My Cookies · Mark all read Powered by UBB.threads™ Contact Us · KiXtart.org website · Top

Generated in 0.071 seconds in which 0.026 seconds were spent on a total of 12 queries. Zlib compression enabled.
Search the board with:
superb Board Search
or try with google:
Google
Web kixtart.org