KIX32 dialog box does not close automatically upon completion - KiXtart.org - official site

You are not logged in. [Log In] KiXtart.org website » Forums » KiXtart » Lounge » KIX32 dialog box does not close automatically upon completion

Page 1 of 1

1

Topic Options

#101572 - 2003-05-28 04:58 AM KIX32 dialog box does not close automatically upon completion
westham westham Fresh Scripter Registered: 2003-05-28 Posts: 16	Hi, I am running KIX32 V4.11 on Windows 2000 domain Controllers. Anyone has any idea why the KIX dialog box does not close automatically upon completion of running the scripts. The box will juz stay at the last statement run. I noticed that this happened only on Windows XP Professional machines. This does not happen on Windows 98 machines. Appreciate for any advice urgently. Tks & Rgds.
Top

#101573 - 2003-05-28 05:04 AM Re: KIX32 dialog box does not close automatically upon completion
Howard Bullock Howard Bullock KiX Supporter Registered: 2000-09-15 Posts: 5809 Loc: Harrisburg, PA USA	This sounds familiar. Are you using a batch file? If so, post it. Are you using the RUN command in your script? If so, what are you running? [ 28. May 2003, 05:41: Message edited by: Howard Bullock ] _________________________ Home page: http://www.kixhelp.com/hb/
Top

#101574 - 2003-05-28 05:29 AM Re: KIX32 dialog box does not close automatically upon completion
westham westham Fresh Scripter Registered: 2003-05-28 Posts: 16	I am using script file with file extension .SCR Below is the contents in this .SCR file. <<Begin of script>> if ingroup("AuditWizard") SHELL '%COMSPEC% /c \\svr1\AuditBuild\scan32.exe' Exit <<End of script>> This script is required for my software Audit Wizard to audit all logon users hardware & software information. Tks & Rgds.
Top

#101575 - 2003-05-28 05:43 AM Re: KIX32 dialog box does not close automatically upon completion
Howard Bullock Howard Bullock KiX Supporter Registered: 2000-09-15 Posts: 5809 Loc: Harrisburg, PA USA	I had similar behavior calling SMSLS.bat using RUN. The problem does not occur when using SHELL. Comment out the SCAN32.exe and seen if the behavior changes. If it does, then we can discuss options. Sorry I can't be more help at this time. _________________________ Home page: http://www.kixhelp.com/hb/
Top

#101576 - 2003-05-28 05:44 AM Re: KIX32 dialog box does not close automatically upon completion
Howard Bullock Howard Bullock KiX Supporter Registered: 2000-09-15 Posts: 5809 Loc: Harrisburg, PA USA	If this is your entire script, why use KiXtart at all. Use a batch file and see if that performs better. _________________________ Home page: http://www.kixhelp.com/hb/
Top

#101577 - 2003-05-28 05:52 AM Re: KIX32 dialog box does not close automatically upon completion
westham westham Fresh Scripter Registered: 2003-05-28 Posts: 16	I have a main script called kixtart.scr which calls many other .scr files. This auditwizard.scr file that I am encountering problem is one of the many .scr files. Okie, I'll try to use a batch file & see if it works. I presume you are referring to calling the batch file from my kixtart.scr rt ? Forgive my ignorance as I am pretty new to Kixtart. Tks & Rgds.
Top

#101578 - 2003-05-28 05:55 AM Re: KIX32 dialog box does not close automatically upon completion
Howard Bullock Howard Bullock KiX Supporter Registered: 2000-09-15 Posts: 5809 Loc: Harrisburg, PA USA	My comments related to my thought that this was your entire KiXtart script. But wrapping it in a batch file may change the behavior. _________________________ Home page: http://www.kixhelp.com/hb/
Top

#101579 - 2003-05-28 10:08 AM Re: KIX32 dialog box does not close automatically upon completion
westham westham Fresh Scripter Registered: 2003-05-28 Posts: 16	I tried using the batch file method but it doesn't work. Below are the script file & batch file that I have created. In my main script KIXTART.SCR, I have the following statement:- CALL CUSTOM.SCR In CUSTOM.SCR, I have the following statements:- IF INGROUP ("AuditWizard") SHELL "AuditWizard.bat" EXIT In AUDITWIZARD.BAT, I have the following statements:- %COMSPEC% /c \\fs01\AuditBuild\scan32.exe EXIT Somehow or rather, when it is executing the auditwizard.bat file, after finishing the scan32.exe, it will just hang there. Fyi : While performing the scan, a separate window will appear collecting all the hardware & software information & this window will close automatically. However, the KIX32 windows will just stay at the "\\fs01\AuditBuild\scan32.exe" statement. Did I write these scripts correctly ? Appreciate any further advice or any other advice from anyone. Tks & Rgds.
Top

#101580 - 2003-05-28 11:29 AM Re: KIX32 dialog box does not close automatically upon completion
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	at least the shell line where you try to call the bat is wrong. basically also the bat is wrong (even though it will work...) http://www.kixtart.org/board/ultimatebb.php?ubb=get_topic;f=1;t=005585#000002 check that out. this has been discussed many times but couldn't find many of them back. you have 2 choises: don't execute the audit from within kixtart script or use run. afaik, at least it works for rocco. _________________________ ! download KiXnet
Top

Page 1 of 1

1

Previous Topic

Previous Topic View All Topics

View All Topics

Index Next Topic

Next Topic

Moderator: Arend_, Allen, Jochen, Radimus, Glenn Barnas, ShaneEP, Ruud van Velsen, Mart

Hop to:

Shout Box

Who's Online

1 registered (Allen) and 641 anonymous users online.

Newest Members

batdk82, StuTheCoder, M_Moore, BeeEm, min_seow
17885 Registered Users

Generated in 0.062 seconds in which 0.027 seconds were spent on a total of 12 queries. Zlib compression enabled.

click tracking