Page 2 of 5 <12345>
Topic Options
#69481 - 2002-09-06 12:29 AM Re: BBChecker II Update
Chris S. Offline
MM club member
*****

Registered: 2002-03-18
Posts: 2368
Loc: Earth
Shawn, I'm sorry, I missed your question. I've just been updating the code up at the top of the post.

My first crack at including the 'slider' in with the main script was to basically cut and paste the script inside the slider() function. Obviously, that didn't work because of the object residing inside the function.

I haven't looked at it too much since, but I'm thinking that creating the form outside of the function and just doing a 'show' and 'hide' inside the slider() function might do the trick. Especially since you've added the timer in kixforms.

Top
#69482 - 2002-09-06 12:31 AM Re: BBChecker II Update
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 2001-06-05
Posts: 22343
Loc: OK
pat...
well, the slider is not the only part taking the position from taskbar.

the whole checker is standing on above it.

anyway, thanks for checking on that. maybe I could even get my udf updated with supporting parts...
_________________________
!

download KiXnet

Top
#69483 - 2002-09-06 12:31 AM Re: BBChecker II Update
Chris S. Offline
MM club member
*****

Registered: 2002-03-18
Posts: 2368
Loc: Earth
BTW, I have been running my version of the slider since I posted this. It works great. No more stealing the focus when I'm typing in some other application.
Top
#69484 - 2002-09-06 12:42 AM Re: BBChecker II Update
Shawn Administrator Offline
Administrator
*****

Registered: 1999-08-13
Posts: 8611
Show me the money ...

[edit]

Maybe Vig's "SoftWhere?" application will tell me where I can get this script ? [Wink]

[edit]

Im an idiot ... your revised slider is in the first post ... so you didn't make any mods to the main script, eh ? Just plug-and-play the slider ?

[ 06. September 2002, 00:58: Message edited by: Shawn ]

Top
#69485 - 2002-09-06 01:02 AM Re: BBChecker II Update
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 2001-06-05
Posts: 22343
Loc: OK
is that modular scripting or what?

 
_________________________
!

download KiXnet

Top
#69486 - 2002-09-06 01:04 AM Re: BBChecker II Update
Chris S. Offline
MM club member
*****

Registered: 2002-03-18
Posts: 2368
Loc: Earth
{Editors note: I'm talking about integrating the slider into the main script here. Not running the slider as a separate script as Jooel had originally scripted it.}

Well, I did modifiy the main script some. I had to to get it to work. As far as I know, you can't have functions within a function. [Wink]

The problem was the createform from within the function, though. As Vig experienced with his software form script, you just can't do that w/o mucking things up. [Wink]

I started to go through the main script some, but didn't have enough time to get a handle on all of the functions. I was playing around with this with my 'spare-time' at work, after all. [Wink]

[ 06. September 2002, 01:08: Message edited by: Chris S. ]

Top
#69487 - 2002-09-06 01:04 AM Re: BBChecker II Update
Howard Bullock Offline
KiX Supporter
*****

Registered: 2000-09-15
Posts: 5809
Loc: Harrisburg, PA USA
Lonkero, thanks for a great tool. Chris, thanks for the improved slider.

[ 06. September 2002, 01:05: Message edited by: Howard Bullock ]
_________________________
Home page: http://www.kixhelp.com/hb/

Top
#69488 - 2002-09-06 01:06 AM Re: BBChecker II Update
Chris S. Offline
MM club member
*****

Registered: 2002-03-18
Posts: 2368
Loc: Earth
Oh, the question was: did I have to modify the main script to update the slider? No. I used all of Jooel's variables in my script. I just renamed his slider and put mine in the folder in it's place. [Wink]
Top
#69489 - 2002-09-06 01:20 AM Re: BBChecker II Update
Shawn Administrator Offline
Administrator
*****

Registered: 1999-08-13
Posts: 8611
k - im due for a BBChecker upgrade anyways ... so this mucking-up problem ... explain what happens ... is it consistent, can you reproduce easily ... whats it "look like" ?
Top
#69490 - 2002-09-06 01:32 AM Re: BBChecker II Update
Chris S. Offline
MM club member
*****

Registered: 2002-03-18
Posts: 2368
Loc: Earth
What happened was that the form would never even show up. I didn't get any errors, just no form. I didn't change any of the values so it couldn't have been that the form was off the page.

I didn't spend a lot of time on it, however, and quickly reverted back to 'call'ing it from slider.kix.

Top
#69491 - 2002-09-06 01:32 AM Re: BBChecker II Update
Shawn Administrator Offline
Administrator
*****

Registered: 1999-08-13
Posts: 8611
Actually Chris ... if its not too much of a problem ... can you email me the code ... with the Slider integrated into the main script ... and maybe give me some thoughts as to what is happening ...

mailto:stassie@sympatico.ca

jooel:

Whats happening buddy ... you haven't been too active of late ...

[ 06. September 2002, 01:35: Message edited by: Shawn ]

Top
#69492 - 2002-09-06 01:51 AM Re: BBChecker II Update
Chris S. Offline
MM club member
*****

Registered: 2002-03-18
Posts: 2368
Loc: Earth
If I still have it. And if I do it's at work and I'm not. I'll see if I can find it tomorrow morning.

Heck, I might just play around with it tonight.

It's sad, I'm starting to code for recreational purposes. I think I need a 12-step program.

Anyway, here is the code I came up with. This works, but I had to comment out the timer.interval = 5000 line and replace it with a sleep 5.

code:
;
; BBChecker II - KiXtart Bulleting Board New Post Checker (RC-4)
;
; Dependencies (included in package):
; Wkix32 - KiXtart 4.11
; kixforms.dll - KiXForms (build 21)
; IE5 or higher
;
; -Lonkero
;
;todo's before release:
; parse takes the page as input.
; this way later update of var names is no problem.
;
; installation package
;
gosub "init"
while $form.visible parse()
if $show
$msg.caption = $show $hlurl.listindex=0 formlink($hlurl.text)
$form.caption = $show+" - BBChecker II"
if $beep play "256t1d500f" endif $tmp=3
if $focus=0 and $sslider $form.show(2) slide($msg.caption) $form.height=$tmp inline() endif
else $tmp=$looptime
endif
$time=@ticks+($tmp*1000)
do sleep 0.2 inline() until @error or ($time < @ticks)
loop
gosub "final"
exit 0

function inline() $=execute($form.doevents(1)) $=execute($form.doevents(1)) endfunction

function parse()
$httpObj.open("GET","http://kixtart.org/cgi-bin/ultimatebb.cgi?", not 1)
$httpObj.send() $data=$httpObj.Responsetext
if 1000<len($data)
inline()
$data=substr($data,instr($data,'ubb=get_profile')+10)
$bl.clear $bll.clear
if instr($data,'ubb=get_profile')<instr($data,'guest(s)')
$data=substr($data,instr($data,'ubb=get_profile'))
$users=substr($data,1,instr($data,' and'))
for each $user in split($users,'</a>, ')
$bll.additem(substr($user,instr($user,';u=')+3,instr($user,'">')-3-instr($user,';u=')),-1)
$bl.additem(substr($user,instr($user,'">')+2),-1)
next
$bl.removeitem($bl.listcount-1)
endif
for $c=0 to 6
$data=substr($data,instr($data,'&nbsp;<a href=')+15)
$y[$c]=substr($data,1,instr($data,'"')-1)
$data=substr($data,instr($data,'>')+1)
$x[$c]=substr($data,1,instr($data,'</a>') - 1)+" "
$x[$c]=join(split($x[$c],"&quot;"),'"')
$data=substr($data,instr($data,chr(10))+1)
if instr(substr($data,1,1),"<")
$users=substr($data,7,instr($data,chr(10))-7) else
$users=substr($data,1,instr($data,chr(10))-1) endif
$x[$c]=$x[$c]+$users
if $my and instr($users,$logon)
$dataold[$c]=$x[$c]
endif
next
$stamp=" "+left(@time,5)+" on @mdayno. of @month"
select
case "Loading elements..."==$msg.caption $show="" $fbb.enabled=1 $fbh.enabled=1 $msg.caption = ""
case $x[0]<>$dataold[0] $show=$x[0] $hl.additem($x[0]+$stamp+" {starters}",0) $hlurl.additem($y[0],0)
case $x[1]<>$dataold[1] $show=$x[1] $hl.additem($x[1]+$stamp+" {scripts}",0) $hlurl.additem($y[1],0)
case $x[2]<>$dataold[2] $show=$x[2] $hl.additem($x[2]+$stamp+" {COM}",0) $hlurl.additem($y[2],0)
case $x[3]<>$dataold[3] $show=$x[3] $hl.additem($x[3]+$stamp+" {UDF}",0) $hlurl.additem($y[3],0)
case $x[4]<>$dataold[4] $show=$x[4] $hl.additem($x[4]+$stamp+" {beta}",0) $hlurl.additem($y[4],0)
case $x[5]<>$dataold[5] $show=$x[5] $hl.additem($x[5]+$stamp+" {suggestions}",0) $hlurl.additem($y[5],0)
case $x[6]<>$dataold[6] $show=$x[6] $hl.additem($x[6]+$stamp+" {FAQ}",0) $hlurl.additem($y[6],0)
case 1 $show=0
endselect
endif
$dataold=$x
endfunction

function show($)
$form.height=$form.height+(100*$)
if $form.height=340
$hl.top=102
$hbh.top=275
$hbo.top=275
$hba.top=275
else
$hl.top=2
$hbh.top=175
$hbo.top=175
$hba.top=175
endif
if $=2
$hl.visible=1
$hbh.visible=1
$hbo.visible=1
$hba.visible=1
$fbh.enabled=0
else
$bl.visible=1
$blt.visible=1
$bbh.visible=1
$bbp.visible=1
$bbr.visible=1
$fbb.enabled=0
endif
$form.top=$screen-taskbar()+3-$form.height
$msg.top = $form.height-38
$fbe.top = $form.height-20
$fbh.top = $fbe.top
$fbb.top = $fbe.top
$fbs.top = $fbe.top
$form.show(1)
inline()
endfunction

function hide($)
$form.height=$form.height-(100*$)
if $=1
$bl.visible=0
$bbh.visible=0
$bbp.visible=0
$bbr.visible=0
$fbb.enabled=1
$blt.visible=0
else
$hl.visible=0
$hbh.visible=0
$hbo.visible=0
$hba.visible=0
$fbh.enabled=1
endif
$form.top=$screen - (taskbar() + $form.height - 3)
$msg.top = $form.height-38
$fbe.top = $form.height-20
$fbh.top = $fbe.top
$fbb.top = $fbe.top
$fbs.top = $fbe.top
$hl.top=2
$hbo.top=175
$hba.top=175
$hbh.top=175
$form.show(1)
inline()
endfunction

function formlink($in)
$form.onmousemove="$$msg.fontbold=0 $$msg.fontunderline=0"
$msg.onmousemove="$$msg.fontbold=1 $$msg.fontunderline=1"
$msg.onmouseup="$$form.show(2) run 'explorer "+chr(34)+$in+chr(34)+"'"
endfunction

Function TaskBar()
if @dos=="4.0" $_S="StuckRects" else $_S="StuckRects2" endif
$TaskBar=val("&"+substr(readvalue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\$_S","settings"),41,2))
endfunction

function slide($sc)
if instr($sc,'"') $sc=join(split($sc,'"'),"'") endif
;run '@scriptdir\wkix32 "@scriptdir\slider.kix" $$sc="$sc" $$b='+taskbar()

; Begin edit...Commented the above command. The rest of this function
; and the Timer_Timer() function below this one, is my
; modifications to the code.

$b=taskbar()
$h = 120
$w = 300
$DirectionIsUp = 1

$Popup = CreateObject("Kixtart.Form")
$Popup.BorderStyle = 0
$Popup.ScaleHeight = 0
$Popup.ScaleWidth = $w
$Popup.ShowInTaskbar = False ; Not ready yet !
$Popup.TopMost = True

$popLabel = $Popup.Label(@crlf+@crlf+@crlf+@crlf+$sc,,,$w,$h)
$popLabel.BACKCOLOR = $Popup.RGB(255,255,255)
$popLabel.BorderStyle = 4
$popLabel.Alignment = 2

$Popup.Top = $Popup.screen.height - (($b-4)+$Popup.Height)
$Popup.Left = $Popup.Screen.Width - ($w+15)
$Popup.Show

$Timer = $Popup.Timer(10)
$Timer.OnTimer = "Timer_Timer()"

While $Popup.Visible
$=Execute($Popup.DoEvents)
Loop

$Popup = ""
$Timer = ""
$popLabel = ""

endfunction

Function Timer_Timer()
$Timer.Interval = 10
If $DirectionIsUp
$Popup.Height = $Popup.Height + 3
$Popup.Top = $Popup.Top - 3
If $Popup.Height => $h
$Popup.Height = $h
;$Timer.Interval = 5000
sleep 5
$DirectionIsUp = 0
EndIf
Else
$Popup.Height = $Popup.Height -3
$Popup.Top = $Popup.Top + 3
If $Popup.Top >= ($Popup.Screen.Height-$b)
$Timer.Enabled = 0
$Popup.Hide
EndIf
EndIf
EndFunction

:init
$form = createobject("kixtart.form")
global $x[6] $dataold=$x $y=$x $screen=$form.screen.height
$form.caption = "BBChecker II"
$form.width = 430
$form.height = 40
$form.left = $form.screen.width - $form.width - 20
$form.borderstyle = 0
$form.fontsize = 8
$form.fontname = "helvetica"
$form.forecolor = 0
$form.fontbold = 0
$form.onlostfocus = "$$focus=0"
$form.ongotfocus = "$$focus=1"
$msg = $form.label("Loading elements...",15,2,410,12)
$msg.onmouseup="$$form.setfocus()"
$form.top = $screen - (taskbar() + $form.height - 3)
$fbe = $form.commandbutton("Exit",2,20,65,19)
$fbe.onclick = "$$form.visible = 0"
$fbs = $form.commandbutton("Miscellaneous",69,20,80,19)
$fbs.onmouseup = "inline() misc()"
$fbh = $form.commandbutton("History",$form.width - 68,20,65,19)
$fbh.enabled=0
$fbh.onclick = "show(2) $$form.setfocus()"
$fbb = $form.commandbutton("Buddyes",$fbh.left - 68,20,65,19)
$fbb.enabled=0
$fbb.onclick = "show(1) $$form.setfocus()"
$form.visible = 1
inline()
;history block
$hl = $form.listbox(0,2,2,426,170)
$hl.visible = 0
$hl.OnDblClick = "$$form.show(2) $$hlurl.listindex=$$hl.listindex run 'explorer "+chr(34)+"'+$$hlurl.text+'"+chr(34)+"'"
inline()
$hl.onclick="$$form.setfocus()"
$hbh = $form.commandbutton("Hide",$form.width - 80,175,75,20)
$hbh.visible = 0
inline()
$hbh.onclick = "hide(2) $$focus=1"
$hbo = $form.commandbutton("Show Topic",5,175,75,20)
$hbo.visible = 0
inline()
$hbo.onclick = "$$form.show(2) $$hlurl.listindex=$$hl.listindex run 'explorer "+chr(34)+"'+$$hlurl.text+'"+chr(34)+"'"
$hba = $form.commandbutton("Today's Active topics",150,175,130,20)
$hba.visible = 0
inline()
$hba.onclick = "$$form.show(2) run 'explorer "+chr(34)+"http://81.17.37.55/board/ultimatebb.php?ubb=get_daily"+chr(34)+"'"
$hlurl = $form.listbox(0,0,0,0,20)
$hlurl.visible = 0
;buddyes block
$bl = $form.listbox(0,2,15,200,80)
$bl.visible = 0
$bl.onclick="$$form.setfocus()"
inline()
$bll = $form.listbox(0,0,0,0,20)
$bll.visible = 0
$bll.ongotfocus="$$form.setfocus()"
inline()
$blt = $form.label("Logged on users:",5,2,150,12)
$blt.visible = 0
$blt.ongotfocus="$$form.setfocus()"
inline()
$bbh = $form.commandbutton("Hide",$form.width - 80,15,75,20)
$bbh.visible = 0
$bbh.onclick = "hide(1) $$focus=1"
inline()
$bbp = $form.commandbutton("Show Profile",210,15,75,20)
$bbp.visible = 0
$bbp.onclick = "$$form.show(2) $$bll.listindex=$$bl.listindex run 'explorer "+chr(34)+"http://81.17.37.55/cgi-bin/ultimatebb.cgi?ubb=get_profile;u='+$$bll.text+'"+chr(34)+"'"
inline()
$bbr = $form.commandbutton("Recent Posts",210,40,75,20)
$bbr.visible = 0
$bbr.onclick = "$$form.show(2) $$bll.listindex=$$bl.listindex run 'explorer "+chr(34)+"http://81.17.37.55/cgi-bin/ultimatebb.cgi?ubb=recent_user_posts;u='+$$bll.text+'"+chr(34)+"'"
inline()
global $focus $focus=1
;settings
$bk="HKEY_CURRENT_USER\Software\Jooel\bbChecker"
if not keyexist($bk) $=messagebox("bbChecker II installation corruption!@crlfThis propably is due to unclean installation@crlfRe-install needed","bbChecker II",16) exit 0 endif
$looptime=val(readvalue($bk,"looptime"))
$beep=val(readvalue($bk,"beep"))
$sslider=val(readvalue($bk,"slider"))
$my=val(readvalue($bk,"my"))
$logon=readvalue($bk,"logon")
;xmlhttp related func
$cache=readvalue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings","SyncMode5")
$=writevalue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings","SyncMode5","3","reg_dword")
$httpObj = createobject("microsoft.xmlhttp")
return

:final
$ = writevalue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings","SyncMode5",$cache,"reg_dword")
return

function misc()
$f = createobject("kixtart.form")
$f.caption = "bbChecker II - Miscellaneous"
$f.width = 250
$f.height = 250
$f.top = $screen/2
$f.left = $f.screen.width-720
$f.fontbold=1
$f.fontname = "Bookman Old Style"
$f.printxy(20,10,"bbChecker II")
$f.fontbold=0
$f.printxy(20,30,"Based on:")
$f.printxy(20,45,"Kixtart 4.11 (wkix32.exe)")
$f.printxy(20,60,"KixForms GUI (KixForms.exe)")
$f.fontname = "helvetica"
$fp = $f.checkbox("Don't show my posts",20,135,130,15)
$f.printxy(150,120,"Logonname:")
$fpt = $f.textbox($logon,150,135,65,17)
$lt = $f.textbox($looptime,150,158,25,17)
$f.printxy(20,160,"Post check interval (secs):")
$fo = $f.checkbox("Beep on post",20,180,110,15)
$fs = $f.checkbox("Show slider",20,200,90,15)
$fp.value = $my
if $fp.value $fpt.enabled=1 else $fpt.enabled=0 endif
$fo.value = $beep
$fs.value = $sslider
$fb = $f.commandbutton("OK",170,205,75,20)
$fb.onclick = 'if val($$lt.text)<10 $$lt.text="10" else $$f.visible=0 endif'
$f.show
while $f.visible $=execute($f.doevents(1))
if $fp.value $fpt.enabled=1 else $fpt.enabled=0 endif
if 99<val($lt.text) $lt.text="99" endif
loop
$looptime = val($lt.text)
$beep = $fo.value
$sslider = $fs.value
$my = $fp.value
$logon=$fpt.text
$=writevalue($bk,"looptime",""+$looptime,"reg_sz")
$=writevalue($bk,"beep",""+$beep,"reg_sz")
$=writevalue($bk,"slider",""+$sslider,"reg_sz")
$=writevalue($bk,"my",""+$my,"reg_sz")
$=writevalue($bk,"logon",""+$logon,"reg_sz")
endfunction



[ 06. September 2002, 14:14: Message edited by: Chris S. ]

Top
#69493 - 2002-09-06 02:05 AM Re: BBChecker II Update
Shawn Administrator Offline
Administrator
*****

Registered: 1999-08-13
Posts: 8611
cool ... i still think it has something to do with scoping and dimming ...
Top
#69494 - 2002-09-06 10:10 AM Re: BBChecker II Update
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 2001-06-05
Posts: 22343
Loc: OK
didn't you have one integrated version a while back?

I wonder, if it does not show the form at all...

in checker beta's when it still was inside the mainscript, it hanged the code totally...
_________________________
!

download KiXnet

Top
#69495 - 2002-09-06 10:44 AM Re: BBChecker II Update
MightyR1 Offline
MM club member
*****

Registered: 1999-09-09
Posts: 1264
Loc: The Netherlands
Jooel,

I've tested the integrated bbCheckerII script on a W95 box and.... it worked with minor adjustments.

Hmmm, minor adjustments I here you say. Well the only thing I adjusted was the way yhe IE browser was started. I've got W95 OSR2.5 Dutch with IE5.5 and the run 'explorer didn't work. After changing the explorer command to the start command, it worked fine.

I've also corrected the # of forums (8 not 7)

So the taskbar() works fine on W95 too.

How do we get rid of the annoying dos box???

W95_bbChecker.kix
code:
;
; BBChecker II - KiXtart Bulleting Board New Post Checker (RC-4)
;
; Dependencies (included in package):
; Wkix32 - KiXtart 4.11
; kixforms.dll - KiXForms (build 21)
; IE5 or higher
;
; -Lonkero
;
;todo's before release:
; parse takes the page as input.
; this way later update of var names is no problem.
;
; installation package
;
Break on
Gosub "init"

Play "1g256t1d600f1g256t1d600f1g256t1d600f1g256t4d400f"

While $form.visible parse()
If $show
$msg.caption = $show $hlurl.listindex=0 formlink($hlurl.text)
$form.caption = $show+" - BBChecker II"
If $Beep
Play "1g256t1d500f1g256t1d400f1g256t1d600f"
EndIf
$tmp=3
If $focus=0 AND $sslider
$form.show(2)
slide($msg.caption)
$form.height=$tmp
inline()
EndIf
Else
$tmp=$looptime
EndIf
$time=@ticks+($tmp*1000)
Do
Sleep 0.2
inline()
Until @error OR ($time < @ticks)
Loop

Gosub "final"

Exit 0


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function inline()

$=Execute($form.doevents(1))
$=Execute($form.doevents(1))

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function parse()

$httpObj.Open("GET","http://kixtart.org/cgi-bin/ultimatebb.cgi?", NOT 1)
$httpObj.send() $data=$httpObj.Responsetext

If 1000<Len($data)
inline()
$data=SubStr($data,InStr($data,'ubb=get_profile')+10)
$bl.clear $bll.clear

If InStr($data,'ubb=get_profile')<InStr($data,'guest(s)')
$data=SubStr($data,InStr($data,'ubb=get_profile'))
$users=SubStr($data,1,InStr($data,' and'))

For Each $user in Split($users,'</a>, ')
$bll.additem(SubStr($user,InStr($user,';u=')+3,InStr($user,'">')-3-InStr($user,';u=')),-1)
$bl.additem(SubStr($user,InStr($user,'">')+2),-1)
Next
$bl.removeitem($bl.listcount-1)
EndIf

For $c=0 to 7
$data=SubStr($data,InStr($data,'&nbsp;<a href=')+15)
$y[$c]=SubStr($data,1,InStr($data,'"')-1)
$data=SubStr($data,InStr($data,'>')+1)
$x[$c]=SubStr($data,1,InStr($data,'</a>') - 1)+" "
$x[$c]=join(Split($x[$c],"&quot;"),'"')
$data=SubStr($data,InStr($data,Chr(10))+1)

If InStr(SubStr($data,1,1),"<")
$users=SubStr($data,7,InStr($data,Chr(10))-7)
Else
$users=SubStr($data,1,InStr($data,Chr(10))-1)
EndIf

$x[$c]=$x[$c]+$users

If $my AND InStr($users,$logon)
$dataold[$c]=$x[$c]
EndIf
Next

$stamp=" "+Left(@time,5)+" on @mdayno. of @month"

Select
Case "Loading elements..."==$msg.caption $show="" $fbb.enabled=1 $fbh.enabled=1 $msg.caption = ""
Case $x[0]<>$dataold[0] $show=$x[0] $hl.additem($x[0]+$stamp+" {starters}",0) $hlurl.additem($y[0],0)
Case $x[1]<>$dataold[1] $show=$x[1] $hl.additem($x[1]+$stamp+" {scripts}",0) $hlurl.additem($y[1],0)
Case $x[2]<>$dataold[2] $show=$x[2] $hl.additem($x[2]+$stamp+" {discussions}",0) $hlurl.additem($y[2],0)
Case $x[3]<>$dataold[3] $show=$x[3] $hl.additem($x[3]+$stamp+" {COM}",0) $hlurl.additem($y[3],0)
Case $x[4]<>$dataold[4] $show=$x[4] $hl.additem($x[4]+$stamp+" {UDF}",0) $hlurl.additem($y[4],0)
Case $x[5]<>$dataold[5] $show=$x[5] $hl.additem($x[5]+$stamp+" {beta}",0) $hlurl.additem($y[5],0)
Case $x[6]<>$dataold[6] $show=$x[6] $hl.additem($x[6]+$stamp+" {suggestions}",0) $hlurl.additem($y[6],0)
Case $x[7]<>$dataold[7] $show=$x[7] $hl.additem($x[7]+$stamp+" {FAQ}",0) $hlurl.additem($y[7],0)
Case 1 $show=0
EndSelect
EndIf

$dataold=$x

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function show($)

$form.height=$form.height+(100*$)

If $form.height=340
$hl.top=102
$hbh.top=275
$hbo.top=275
$hba.top=275
Else
$hl.top=2
$hbh.top=175
$hbo.top=175
$hba.top=175
EndIf

If $=2
$hl.visible=1
$hbh.visible=1
$hbo.visible=1
$hba.visible=1
$fbh.enabled=0
Else
$bl.visible=1
$blt.visible=1
$bbh.visible=1
$bbp.visible=1
$bbr.visible=1
$fbb.enabled=0
EndIf

$form.top=$screen-taskbar()+3-$form.height
$msg.top = $form.height-38
$fbe.top = $form.height-20
$fbh.top = $fbe.top
$fbb.top = $fbe.top
$fbs.top = $fbe.top
$form.show(1)
inline()

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function hide($)

$form.height=$form.height-(100*$)

If $=1
$bl.visible=0
$bbh.visible=0
$bbp.visible=0
$bbr.visible=0
$fbb.enabled=1
$blt.visible=0
Else
$hl.visible=0
$hbh.visible=0
$hbo.visible=0
$hba.visible=0
$fbh.enabled=1
EndIf

$form.top=$screen - (taskbar() + $form.height - 3)
$msg.top = $form.height-38
$fbe.top = $form.height-20
$fbh.top = $fbe.top
$fbb.top = $fbe.top
$fbs.top = $fbe.top
$hl.top=2
$hbo.top=175
$hba.top=175
$hbh.top=175
$form.show(1)
inline()

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function formlink($in)

$form.onmousemove="$$msg.fontbold=0 $$msg.fontunderline=0"
$msg.onmousemove="$$msg.fontbold=1 $$msg.fontunderline=1"
$msg.onmouseup="$$form.show(2) run 'start "+Chr(34)+$in+Chr(34)+"'"

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function TaskBar()
If @dos=="4.0"
$_S="StuckRects"
Else
$_S="StuckRects2"
EndIf

$TaskBar=Val("&"+SubStr(ReadValue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\$_S","settings"),41,2))

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function slide($sc)

If InStr($sc,'"')
$sc=join(Split($sc,'"'),"'")
EndIf

;run '@scriptdir\wkix32 "@scriptdir\slider.kix" $$sc="$sc" $$b='+taskbar()

; Begin edit...Commented the above command. The rest of this function
; and the Timer_Timer() function below this one, is my
; modifications to the code.

$b=taskbar()
$h1 = 23
$w = 300 ; Len($sc)*15+10 ; 300
$h = 0
$DirectionIsUp = 1

$Popup = CreateObject("Kixtart.Form")

$Popup.BorderStyle = 0
$Popup.Height = 0
$Popup.Width = $w
$Popup.fontsize = 10
$Popup.fontname = "helvetica"
$Popup.forecolor = 0
$Popup.fontbold = 1
; $Popup.Top = $Popup.screen.height - $b - $h - 2 - 500
; $Popup.Left = $Popup.Screen.Width - $w - 2 - 500
$Popup.Top = ($Popup.screen.height - $b) / 2
$Popup.Left = ($Popup.Screen.Width - $w) / 2

$Popup.ShowInTaskbar = False ; Not ready yet !
$Popup.TopMost = True

$popLabel = $Popup.Label($sc,0,0,$w,$h1)
$popLabel.BACKCOLOR = $Popup.RGB(255,255,0)
$popLabel.BorderStyle = 3 ; 4
$popLabel.Alignment = 2
$Timer = $Popup.Timer(10)
$Timer.OnTimer = "Timer_Timer()"

Sleep 0.5

$Popup.Show

While $Popup.Visible
$=Execute($Popup.DoEvents)
Loop

$Popup = ""
$Timer = ""
$popLabel = ""

EndFunction


Function Timer_Timer()
$Timer.Interval = 10
If $DirectionIsUp
$h = $h + 1
$popup.height = $h
$Popup.Top = $Popup.Top - 1
If $h >= $h1
$Timer.Interval = 2500
$DirectionIsUp = 0
;play "256t1d500f"
EndIf
Else
$h = $h - 1
$popup.height = $h
$Popup.Top = $Popup.Top + 1
If $h <= 0
$Timer.Enabled = 0
$Popup.Hide
EndIf
EndIf
EndFunction



;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
:init

$form = CreateObject("kixtart.form")
Global $x[7] $dataold=$x $y=$x
$screen=$form.screen.height

$form.caption = "BBChecker II"
$form.width = 430
$form.height = 40
$form.Left = $form.screen.width - $form.width - 20
$form.borderstyle = 0
$form.fontsize = 8
$form.fontname = "helvetica"
$form.forecolor = 0
$form.fontbold = 0
$form.onlostfocus = "$$focus=0"
$form.ongotfocus = "$$focus=1"

$msg = $form.label("Loading elements...",15,2,410,12)
$msg.onmouseup="$$form.setfocus()"

$form.top = $screen - (taskbar() + $form.height - 3)
$fbe = $form.commandbutton("Exit",2,20,65,19)
$fbe.onclick = "$$form.visible = 0"
$fbs = $form.commandbutton("Miscellaneous",69,20,80,19)
$fbs.onmouseup = "inline() misc()"
$fbh = $form.commandbutton("History",$form.width - 68,20,65,19)
$fbh.enabled=0
$fbh.onclick = "show(2) $$form.setfocus()"
$fbb = $form.commandbutton("Buddyes",$fbh.Left - 68,20,65,19)
$fbb.enabled=0
$fbb.onclick = "show(1) $$form.setfocus()"
$form.visible = 1

inline()

;history block
$hl = $form.listbox(0,2,2,426,170)
$hl.visible = 0
$hl.OnDblClick = "$$form.show(2) $$hlurl.listindex=$$hl.listindex run 'start "+Chr(34)+"'+$$hlurl.text+'"+Chr(34)+"'"

inline()

$hl.onclick="$$form.setfocus()"
$hbh = $form.commandbutton("Hide",$form.width - 80,175,75,20)
$hbh.visible = 0

inline()

$hbh.onclick = "hide(2) $$focus=1"
$hbo = $form.commandbutton("Show Topic",5,175,75,20)
$hbo.visible = 0

inline()

$hbo.onclick = "$$form.show(2) $$hlurl.listindex=$$hl.listindex run 'start "+Chr(34)+"'+$$hlurl.text+'"+Chr(34)+"'"
$hba = $form.commandbutton("Today's Active topics",150,175,130,20)
$hba.visible = 0

inline()

$hba.onclick = "$$form.show(2) run 'start "+Chr(34)+"http://81.17.37.55/board/ultimatebb.php?ubb=get_daily"+Chr(34)+"'"
$hlurl = $form.listbox(0,0,0,0,20)
$hlurl.visible = 0

;buddyes block
$bl = $form.listbox(0,2,15,200,80)
$bl.visible = 0
$bl.onclick="$$form.setfocus()"

inline()

$bll = $form.listbox(0,0,0,0,20)
$bll.visible = 0
$bll.ongotfocus="$$form.setfocus()"

inline()

$blt = $form.label("Logged on users:",5,2,150,12)
$blt.visible = 0
$blt.ongotfocus="$$form.setfocus()"

inline()

$bbh = $form.commandbutton("Hide",$form.width - 80,15,75,20)
$bbh.visible = 0
$bbh.onclick = "hide(1) $$focus=1"

inline()

$bbp = $form.commandbutton("Show Profile",210,15,75,20)
$bbp.visible = 0
$bbp.onclick = "$$form.show(2) $$bll.listindex=$$bl.listindex run 'start "+Chr(34)+"http://81.17.37.55/cgi-bin/ultimatebb.cgi?ubb=get_profile;u='+$$bll.text+'"+Chr(34)+"'"

inline()

$bbr = $form.commandbutton("Recent Posts",210,40,75,20)
$bbr.visible = 0
$bbr.onclick = "$$form.show(2) $$bll.listindex=$$bl.listindex run 'start "+Chr(34)+"http://81.17.37.55/cgi-bin/ultimatebb.cgi?ubb=recent_user_posts;u='+$$bll.text+'"+Chr(34)+"'"

inline()

Global $focus $focus=1

;settings
$bk="HKEY_CURRENT_USER\Software\Jooel\bbChecker"

If NOT KeyExist($bk)
$=MessageBox("bbChecker II installation corruption!@crlfThis propably is due to unclean installation@crlfRe-install needed","bbChecker II",16)
Exit 0
EndIf

$looptime=Val(ReadValue($bk,"looptime"))
$Beep=Val(ReadValue($bk,"beep"))
$sslider=Val(ReadValue($bk,"slider"))
$my=Val(ReadValue($bk,"my"))
$logon=ReadValue($bk,"logon")

;xmlhttp related func
$cache=ReadValue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings","SyncMode5")
$=WriteValue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings","SyncMode5","3","reg_dword")
$httpObj = CreateObject("microsoft.xmlhttp")

Return



;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
:final

$ = WriteValue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings","SyncMode5",$cache,"reg_dword")

Return


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function misc()

$f = CreateObject("kixtart.form")
$f.caption = "bbChecker II - Miscellaneous"
$f.width = 250
$f.height = 250
$f.top = $screen/2
$f.Left = $f.screen.width-720
$f.fontbold=1
$f.fontname = "Bookman Old Style"
$f.printxy(20,10,"bbChecker II")
$f.fontbold=0
$f.printxy(20,30,"Based on:")
$f.printxy(20,45,"Kixtart 4.11 (wkix32.exe)")
$f.printxy(20,60,"KixForms GUI (KixForms.exe)")
$f.fontname = "helvetica"
$fp = $f.checkbox("Don't show my posts",20,135,130,15)
$f.printxy(150,120,"Logonname:")
$fpt = $f.textbox($logon,150,135,65,17)
$lt = $f.textbox($looptime,150,158,25,17)
$f.printxy(20,160,"Post check interval (secs):")
$fo = $f.checkbox("Beep on post",20,180,110,15)
$fs = $f.checkbox("Show slider",20,200,90,15)
$fp.value = $my

If $fp.value
$fpt.enabled=1
Else
$fpt.enabled=0
EndIf

$fo.value = $Beep
$fs.value = $sslider
$fb = $f.commandbutton("OK",170,205,75,20)
$fb.onclick = 'if val($$lt.text)<10 $$lt.text="10" else $$f.visible=0 endif'
$f.show
While $f.visible
$=Execute($f.doevents(1))
If $fp.value
$fpt.enabled=1
Else
$fpt.enabled=0
EndIf

If 99<Val($lt.text)
$lt.text="99"
EndIf
Loop

$looptime = Val($lt.text)
$Beep = $fo.value
$sslider = $fs.value
$my = $fp.value
$logon=$fpt.text
$=WriteValue($bk,"looptime",""+$looptime,"reg_sz")
$=WriteValue($bk,"beep",""+$Beep,"reg_sz")
$=WriteValue($bk,"slider",""+$sslider,"reg_sz")
$=WriteValue($bk,"my",""+$my,"reg_sz")
$=WriteValue($bk,"logon",""+$logon,"reg_sz")

EndFunction

_________________________
Greetz,
Patrick Rutten

- We'll either find a way or make one...
- Knowledge is power; knowing how to find it is more powerful...
- Problems don't exist; they are challenges...

Top
#69496 - 2002-09-06 11:31 AM Re: BBChecker II Update
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 2001-06-05
Posts: 22343
Loc: OK
pat, nice layout you got there.

man, I can't keep up with the changes as how to integrate the one's I've done during the week...

if you take the start command of, do you still get your dos box?

also, using iexplore instead of explorer should fix the problem for win9x in there.

also, do you mean that the forms are correctly shown on top of the taskbar as you said that you had only that one problem?
_________________________
!

download KiXnet

Top
#69497 - 2002-09-07 12:09 AM Re: BBChecker II Update
MightyR1 Offline
MM club member
*****

Registered: 1999-09-09
Posts: 1264
Loc: The Netherlands
Jooel,

now I've got one .Kix for both W95 and W2k. [Big Grin]

Take a look at the :init section. Depending on the OS I define the $runie variable.

On W95 the dos box disappears if I directly call iexplore [Wink]

The forms are displayed correctly. Also the slider doesn't interfere with normal work!!

code:
;
; BBChecker II - KiXtart Bulleting Board New Post Checker (RC-4)
;
; Dependencies (included in package):
; Wkix32 - KiXtart 4.11
; kixforms.dll - KiXForms (build 21)
; IE5 or higher
;
; -Lonkero
;
;todo's before release:
; parse takes the page as input.
; this way later update of var names is no problem.
;
; installation package
;
Break on
Gosub "init"

Play "1g256t1d600f1g256t1d600f1g256t1d600f1g256t4d400f"

While $form.visible parse()
If $show
$msg.caption = $show $hlurl.listindex=0 formlink($hlurl.text)
$form.caption = $show+" - BBChecker II"
If $Beep
Play "1g256t1d500f1g256t1d400f1g256t1d600f"
EndIf
$tmp=3
If $focus=0 AND $sslider
$form.show(2)
slide($msg.caption)
$form.height=$tmp
inline()
EndIf
Else
$tmp=$looptime
EndIf
$time=@ticks+($tmp*1000)
Do
Sleep 0.2
inline()
Until @error OR ($time < @ticks)
Loop

Gosub "final"

Exit 0


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function inline()

$=Execute($form.doevents(1))
$=Execute($form.doevents(1))

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function parse()

$httpObj.Open("GET","http://kixtart.org/cgi-bin/ultimatebb.cgi?", NOT 1)
$httpObj.send() $data=$httpObj.Responsetext

If 1000<Len($data)
inline()
$data=SubStr($data,InStr($data,'ubb=get_profile')+10)
$bl.clear $bll.clear

If InStr($data,'ubb=get_profile')<InStr($data,'guest(s)')
$data=SubStr($data,InStr($data,'ubb=get_profile'))
$users=SubStr($data,1,InStr($data,' and'))

For Each $user in Split($users,'</a>, ')
$bll.additem(SubStr($user,InStr($user,';u=')+3,InStr($user,'">')-3-InStr($user,';u=')),-1)
$bl.additem(SubStr($user,InStr($user,'">')+2),-1)
Next
$bl.removeitem($bl.listcount-1)
EndIf

For $c=0 to 7
$data=SubStr($data,InStr($data,'&nbsp;<a href=')+15)
$y[$c]=SubStr($data,1,InStr($data,'"')-1)
$data=SubStr($data,InStr($data,'>')+1)
$x[$c]=SubStr($data,1,InStr($data,'</a>') - 1)+" "
$x[$c]=join(Split($x[$c],"&quot;"),'"')
$data=SubStr($data,InStr($data,Chr(10))+1)

If InStr(SubStr($data,1,1),"<")
$users=SubStr($data,7,InStr($data,Chr(10))-7)
Else
$users=SubStr($data,1,InStr($data,Chr(10))-1)
EndIf

$x[$c]=$x[$c]+$users

If $my AND InStr($users,$logon)
$dataold[$c]=$x[$c]
EndIf
Next

$stamp=" "+Left(@time,5)+" on @mdayno. of @month"

Select
Case "Loading elements..."==$msg.caption $show="" $fbb.enabled=1 $fbh.enabled=1 $msg.caption = ""
Case $x[0]<>$dataold[0] $show=$x[0] $hl.additem($x[0]+$stamp+" {starters}",0) $hlurl.additem($y[0],0)
Case $x[1]<>$dataold[1] $show=$x[1] $hl.additem($x[1]+$stamp+" {scripts}",0) $hlurl.additem($y[1],0)
Case $x[2]<>$dataold[2] $show=$x[2] $hl.additem($x[2]+$stamp+" {discussions}",0) $hlurl.additem($y[2],0)
Case $x[3]<>$dataold[3] $show=$x[3] $hl.additem($x[3]+$stamp+" {COM}",0) $hlurl.additem($y[3],0)
Case $x[4]<>$dataold[4] $show=$x[4] $hl.additem($x[4]+$stamp+" {UDF}",0) $hlurl.additem($y[4],0)
Case $x[5]<>$dataold[5] $show=$x[5] $hl.additem($x[5]+$stamp+" {beta}",0) $hlurl.additem($y[5],0)
Case $x[6]<>$dataold[6] $show=$x[6] $hl.additem($x[6]+$stamp+" {suggestions}",0) $hlurl.additem($y[6],0)
Case $x[7]<>$dataold[7] $show=$x[7] $hl.additem($x[7]+$stamp+" {FAQ}",0) $hlurl.additem($y[7],0)
Case 1 $show=0
EndSelect
EndIf

$dataold=$x

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function show($)

$form.height=$form.height+(100*$)

If $form.height=340
$hl.top=102
$hbh.top=275
$hbo.top=275
$hba.top=275
Else
$hl.top=2
$hbh.top=175
$hbo.top=175
$hba.top=175
EndIf

If $=2
$hl.visible=1
$hbh.visible=1
$hbo.visible=1
$hba.visible=1
$fbh.enabled=0
Else
$bl.visible=1
$blt.visible=1
$bbh.visible=1
$bbp.visible=1
$bbr.visible=1
$fbb.enabled=0
EndIf

$form.top=$screen-taskbar()+3-$form.height
$msg.top = $form.height-38
$fbe.top = $form.height-20
$fbh.top = $fbe.top
$fbb.top = $fbe.top
$fbs.top = $fbe.top
$form.show(1)
inline()

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function hide($)

$form.height=$form.height-(100*$)

If $=1
$bl.visible=0
$bbh.visible=0
$bbp.visible=0
$bbr.visible=0
$fbb.enabled=1
$blt.visible=0
Else
$hl.visible=0
$hbh.visible=0
$hbo.visible=0
$hba.visible=0
$fbh.enabled=1
EndIf

$form.top=$screen - (taskbar() + $form.height - 3)
$msg.top = $form.height-38
$fbe.top = $form.height-20
$fbh.top = $fbe.top
$fbb.top = $fbe.top
$fbs.top = $fbe.top
$hl.top=2
$hbo.top=175
$hba.top=175
$hbh.top=175
$form.show(1)
inline()

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function formlink($in)

$form.onmousemove="$$msg.fontbold=0 $$msg.fontunderline=0"
$msg.onmousemove="$$msg.fontbold=1 $$msg.fontunderline=1"
$msg.onmouseup="$$form.show(2) $runie "+Chr(34)+$in+Chr(34)+"'"

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function TaskBar()
If @dos=="4.0"
$_S="StuckRects"
Else
$_S="StuckRects2"
EndIf

$TaskBar=Val("&"+SubStr(ReadValue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\$_S","settings"),41,2))

EndFunction


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function slide($sc)

If InStr($sc,'"')
$sc=join(Split($sc,'"'),"'")
EndIf

;run '@scriptdir\wkix32 "@scriptdir\slider.kix" $$sc="$sc" $$b='+taskbar()

; Begin edit...Commented the above command. The rest of this function
; and the Timer_Timer() function below this one, is my
; modifications to the code.

$b=taskbar()
$h1 = 23
$w = 300 ; Len($sc)*15+10 ; 300
$h = 0
$DirectionIsUp = 1

$Popup = CreateObject("Kixtart.Form")

$Popup.BorderStyle = 0
$Popup.Height = 0
$Popup.Width = $w
$Popup.fontsize = 10
$Popup.fontname = "helvetica"
$Popup.forecolor = 0
$Popup.fontbold = 1
; $Popup.Top = $Popup.screen.height - $b - $h - 2 - 500
; $Popup.Left = $Popup.Screen.Width - $w - 2 - 500
$Popup.Top = ($Popup.screen.height - $b) / 2
$Popup.Left = ($Popup.Screen.Width - $w) / 2

$Popup.ShowInTaskbar = False ; Not ready yet !
$Popup.TopMost = True

$popLabel = $Popup.Label($sc,0,0,$w,$h1)
$popLabel.BACKCOLOR = $Popup.RGB(255,255,0)
$popLabel.BorderStyle = 3 ; 4
$popLabel.Alignment = 2
$Timer = $Popup.Timer(10)
$Timer.OnTimer = "Timer_Timer()"

Sleep 0.5

$Popup.Show

While $Popup.Visible
$=Execute($Popup.DoEvents)
Loop

$Popup = ""
$Timer = ""
$popLabel = ""

EndFunction


Function Timer_Timer()
$Timer.Interval = 10
If $DirectionIsUp
$h = $h + 1
$popup.height = $h
$Popup.Top = $Popup.Top - 1
If $h >= $h1
$Timer.Interval = 2500
$DirectionIsUp = 0
;play "256t1d500f"
EndIf
Else
$h = $h - 1
$popup.height = $h
$Popup.Top = $Popup.Top + 1
If $h <= 0
$Timer.Enabled = 0
$Popup.Hide
EndIf
EndIf
EndFunction



;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
:init

$form = CreateObject("kixtart.form")
Global $x[7] $dataold=$x $y=$x
$screen=$form.screen.height
Global $runie

If @inwin = 1
$runie = "run 'explorer "
Else
$runie = "run '"+readvalue("HKEY_CLASSES_ROOT\htmlfile\shell\open\command","")+" "
EndIf

$form.caption = "BBChecker II"
$form.width = 430
$form.height = 40
$form.Left = $form.screen.width - $form.width - 20
$form.borderstyle = 0
$form.fontsize = 8
$form.fontname = "helvetica"
$form.forecolor = 0
$form.fontbold = 0
$form.onlostfocus = "$$focus=0"
$form.ongotfocus = "$$focus=1"

$msg = $form.label("Loading elements...",15,2,410,12)
$msg.onmouseup="$$form.setfocus()"

$form.top = $screen - (taskbar() + $form.height - 3)
$fbe = $form.commandbutton("Exit",2,20,65,19)
$fbe.onclick = "$$form.visible = 0"
$fbs = $form.commandbutton("Miscellaneous",69,20,80,19)
$fbs.onmouseup = "inline() misc()"
$fbh = $form.commandbutton("History",$form.width - 68,20,65,19)
$fbh.enabled=0
$fbh.onclick = "show(2) $$form.setfocus()"
$fbb = $form.commandbutton("Buddyes",$fbh.Left - 68,20,65,19)
$fbb.enabled=0
$fbb.onclick = "show(1) $$form.setfocus()"
$form.visible = 1

inline()

;history block
$hl = $form.listbox(0,2,2,426,170)
$hl.visible = 0
$hl.OnDblClick = "$$form.show(2) $$hlurl.listindex=$$hl.listindex $runie "+Chr(34)+"'+$$hlurl.text+'"+Chr(34)+"'"

inline()

$hl.onclick="$$form.setfocus()"
$hbh = $form.commandbutton("Hide",$form.width - 80,175,75,20)
$hbh.visible = 0

inline()

$hbh.onclick = "hide(2) $$focus=1"
$hbo = $form.commandbutton("Show Topic",5,175,75,20)
$hbo.visible = 0

inline()

$hbo.onclick = "$$form.show(2) $$hlurl.listindex=$$hl.listindex $runie "+Chr(34)+"'+$$hlurl.text+'"+Chr(34)+"'"
$hba = $form.commandbutton("Today's Active topics",150,175,130,20)
$hba.visible = 0

inline()

$hba.onclick = "$$form.show(2) $runie "+Chr(34)+"http://81.17.37.55/board/ultimatebb.php?ubb=get_daily"+Chr(34)+"'"
$hlurl = $form.listbox(0,0,0,0,20)
$hlurl.visible = 0

;buddyes block
$bl = $form.listbox(0,2,15,200,80)
$bl.visible = 0
$bl.onclick="$$form.setfocus()"

inline()

$bll = $form.listbox(0,0,0,0,20)
$bll.visible = 0
$bll.ongotfocus="$$form.setfocus()"

inline()

$blt = $form.label("Logged on users:",5,2,150,12)
$blt.visible = 0
$blt.ongotfocus="$$form.setfocus()"

inline()

$bbh = $form.commandbutton("Hide",$form.width - 80,15,75,20)
$bbh.visible = 0
$bbh.onclick = "hide(1) $$focus=1"

inline()

$bbp = $form.commandbutton("Show Profile",210,15,75,20)
$bbp.visible = 0
$bbp.onclick = "$$form.show(2) $$bll.listindex=$$bl.listindex $runie "+Chr(34)+"http://81.17.37.55/cgi-bin/ultimatebb.cgi?ubb=get_profile;u='+$$bll.text+'"+Chr(34)+"'"

inline()

$bbr = $form.commandbutton("Recent Posts",210,40,75,20)
$bbr.visible = 0
$bbr.onclick = "$$form.show(2) $$bll.listindex=$$bl.listindex $runie "+Chr(34)+"http://81.17.37.55/cgi-bin/ultimatebb.cgi?ubb=recent_user_posts;u='+$$bll.text+'"+Chr(34)+"'"

inline()

Global $focus $focus=1

;settings
$bk="HKEY_CURRENT_USER\Software\Jooel\bbChecker"

If NOT KeyExist($bk)
$=MessageBox("bbChecker II installation corruption!@crlfThis propably is due to unclean installation@crlfRe-install needed","bbChecker II",16)
Exit 0
EndIf

$looptime=Val(ReadValue($bk,"looptime"))
$Beep=Val(ReadValue($bk,"beep"))
$sslider=Val(ReadValue($bk,"slider"))
$my=Val(ReadValue($bk,"my"))
$logon=ReadValue($bk,"logon")

;xmlhttp related func
$cache=ReadValue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings","SyncMode5")
$=WriteValue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings","SyncMode5","3","reg_dword")
$httpObj = CreateObject("microsoft.xmlhttp")

Return



;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
:final

$ = WriteValue("HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings","SyncMode5",$cache,"reg_dword")

Return


;>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Function misc()

$f = CreateObject("kixtart.form")
$f.caption = "bbChecker II - Miscellaneous"
$f.width = 250
$f.height = 250
$f.top = $screen/2
$f.Left = $f.screen.width-720
$f.fontbold=1
$f.fontname = "Bookman Old Style"
$f.printxy(20,10,"bbChecker II")
$f.fontbold=0
$f.printxy(20,30,"Based on:")
$f.printxy(20,45,"Kixtart 4.11 (wkix32.exe)")
$f.printxy(20,60,"KixForms GUI (KixForms.exe)")
$f.fontname = "helvetica"
$fp = $f.checkbox("Don't show my posts",20,135,130,15)
$f.printxy(150,120,"Logonname:")
$fpt = $f.textbox($logon,150,135,65,17)
$lt = $f.textbox($looptime,150,158,25,17)
$f.printxy(20,160,"Post check interval (secs):")
$fo = $f.checkbox("Beep on post",20,180,110,15)
$fs = $f.checkbox("Show slider",20,200,90,15)
$fp.value = $my

If $fp.value
$fpt.enabled=1
Else
$fpt.enabled=0
EndIf

$fo.value = $Beep
$fs.value = $sslider
$fb = $f.commandbutton("OK",170,205,75,20)
$fb.onclick = 'if val($$lt.text)<10 $$lt.text="10" else $$f.visible=0 endif'
$f.show
While $f.visible
$=Execute($f.doevents(1))
If $fp.value
$fpt.enabled=1
Else
$fpt.enabled=0
EndIf

If 99<Val($lt.text)
$lt.text="99"
EndIf
Loop

$looptime = Val($lt.text)
$Beep = $fo.value
$sslider = $fs.value
$my = $fp.value
$logon=$fpt.text
$=WriteValue($bk,"looptime",""+$looptime,"reg_sz")
$=WriteValue($bk,"beep",""+$Beep,"reg_sz")
$=WriteValue($bk,"slider",""+$sslider,"reg_sz")
$=WriteValue($bk,"my",""+$my,"reg_sz")
$=WriteValue($bk,"logon",""+$logon,"reg_sz")

EndFunction



[ 06. September 2002, 12:27: Message edited by: MightyR1 ]
_________________________
Greetz,
Patrick Rutten

- We'll either find a way or make one...
- Knowledge is power; knowing how to find it is more powerful...
- Problems don't exist; they are challenges...

Top
#69498 - 2002-09-07 12:18 AM Re: BBChecker II Update
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 2001-06-05
Posts: 22343
Loc: OK
pat, try changing the absolut path of win9x to:
readvalue("HKEY_CLASSES_ROOT\htmlfile\shell\open\command","")

 
_________________________
!

download KiXnet

Top
#69499 - 2002-09-07 12:26 AM Re: BBChecker II Update
MightyR1 Offline
MM club member
*****

Registered: 1999-09-09
Posts: 1264
Loc: The Netherlands
Jooel,

it did the job....

code:
	$runie = "run '"+readvalue("HKEY_CLASSES_ROOT\htmlfile\shell\open\command","")+" "

_________________________
Greetz,
Patrick Rutten

- We'll either find a way or make one...
- Knowledge is power; knowing how to find it is more powerful...
- Problems don't exist; they are challenges...

Top
#69500 - 2002-09-06 01:13 PM Re: BBChecker II Update
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 2001-06-05
Posts: 22343
Loc: OK
ok, will adapt your layouted script to desk and incorporate some changes and shorten the code a little...

also, as it gets working with 2.0 and win9x I have to change some codes from install...

I was also thinking about making the form little bit smaller...
remove the hide buttons (add them to the show buttons [code minimization])
try to implement somekind of show by forum (requires exchaustive usage of arrays)...
partial incorporating of codeparser behind button "show codes"...
make add-on (optional) for kixstrippin' the codes on the fly directly from webpage (behind button "syntax check on code")...

there is lot to do and lots of code to add and that's why it should be kept as "modular" as possible...
even making the all udf's their own file which are included at the start wouldn't make so bad implementation and would keep the script understandable and changeable by all...
_________________________
!

download KiXnet

Top
Page 2 of 5 <12345>


Moderator:  Glenn Barnas, NTDOC, Arend_, Jochen, Radimus, Allen, ShaneEP, Ruud van Velsen, Mart 
Hop to:
Shout Box

Who's Online
0 registered and 241 anonymous users online.
Newest Members
dimi575, Drecksnacken, Nlill, webtools321, multiman
17734 Registered Users

Generated in 0.044 seconds in which 0.014 seconds were spent on a total of 12 queries. Zlib compression enabled.

Search the board with:
superb Board Search
or try with google:
Google
Web kixtart.org