Page 2 of 2 <12
Topic Options
#205902 - 12/10/04 09:45 PM Re: Windows 8 support [Re: Lonkero]
Allen Moderator Online   shocked
KiX Supporter
*****

Registered: 03/04/19
Posts: 4234
Loc: USA
 Quote:
otherwise good info


LOL.

Top
#205904 - 12/10/05 07:20 AM Re: Windows 8 support [Re: Mart]
Patrick20 Offline
Fresh Scripter

Registered: 09/08/27
Posts: 22
Loc: Belgium
Here you have the output:

? @error
0
? @serror
The operation completed successfully.

What can I say, it's stupid I know but have no idea why this happen with W8 , did the test on serveral different machines , new builds...
No mappings , again all the rest of the kix scripting works fine..

Top
#205916 - 12/10/05 07:41 PM Re: Windows 8 support [Re: Patrick20]
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 01/06/05
Posts: 22294
Loc: Claremore, OK
there was a time with windows vista that broke all the logonscripts because UAC.
I am thinking this might be something as fun as well.
does the logonscript work right if you run it manually after logon?
_________________________
!

download KiXnet

Top
#205917 - 12/10/05 08:19 PM Re: Windows 8 support [Re: Lonkero]
ShaneEP Moderator Offline
MM club member
*****

Registered: 02/11/29
Posts: 1984
Loc: Tulsa, OK
Yeah I think he mentioned that before. It may also be the synchronous problem that people have every once in a while. But then again, I would think that would not result in a successful error status.

 Quote:
when I do it from command prompt , they connect without issues

Top
#205918 - 12/10/05 08:41 PM Re: Windows 8 support [Re: ShaneEP]
ShaneEP Moderator Offline
MM club member
*****

Registered: 02/11/29
Posts: 1984
Loc: Tulsa, OK
It seems a few people are having similar issues (even without kix).

http://www.techplex.net/postst71873_Can-t-Map-Network-Drive-with-Login-Script.aspx?=

Have you tried adding the registry key found on this page? (just a shot in the dark)

http://support.microsoft.com/kb/937624

Top
#205919 - 12/10/06 09:02 AM Re: Windows 8 support [Re: ShaneEP]
Patrick20 Offline
Fresh Scripter

Registered: 09/08/27
Posts: 22
Loc: Belgium
ShaneEP,
You're right, the registery key solve the issue. however within win7 you do not need to add this , many thanks .

Top
#205921 - 12/10/06 04:25 PM Re: Windows 8 support [Re: Patrick20]
ShaneEP Moderator Offline
MM club member
*****

Registered: 02/11/29
Posts: 1984
Loc: Tulsa, OK
That's strange. That key was originally for Windows 7 with UAC. I'm pretty surprised that it fixed the issue. But glad it did! ;\)
Top
#205922 - 12/10/06 06:33 PM Re: Windows 8 support [Re: ShaneEP]
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 01/06/05
Posts: 22294
Loc: Claremore, OK
tbh, that doesn't really fix the issue.
but maybe microsoft will fix the UAC in the RTM.

and to anyone reading this thread, only thing this far found that isn't supported by older kixtart versions is @producttype string.
_________________________
!

download KiXnet

Top
#205923 - 12/10/06 07:20 PM Re: Windows 8 support [Re: Lonkero]
Allen Moderator Online   shocked
KiX Supporter
*****

Registered: 03/04/19
Posts: 4234
Loc: USA
The issue in the past was UAC WITH a GPO Startup Script(which that reg hack did fix). If his script is a traditional logon script, then there is definitely something worrisome about the way MS has configured Windows 8.

I'm looking forward to getting a RTM copy of Windows 8, just to see what is really going on here.

Top
#205924 - 12/10/06 09:00 PM Re: Windows 8 support [Re: Allen]
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 01/06/05
Posts: 22294
Loc: Claremore, OK
allen, that actually did "fix" the issue with vista logon script.
I don't remember was it a gpo logonscript or the one in the traditional field but that was only way to fix vista logon map when it came out.
now, why would logonscript run in different security context than the actual user session...
well, they surely have some wicked idea behind it and at the time the MS answer was, screw logonscripts, you need to do this stuff with GPO prefs.
which didn't really work either.
_________________________
!

download KiXnet

Top
#205949 - 12/10/08 07:35 PM Re: Windows 8 support [Re: Lonkero]
Allen Moderator Online   shocked
KiX Supporter
*****

Registered: 03/04/19
Posts: 4234
Loc: USA
This may be the answer in the short term:

Change the following value to:
HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\RequireSecureNegotiate = 0


http://support.microsoft.com/kb/2686098

 Quote:

When a Windows Server 2012 or Windows 8 based computer attempts to connect to a third-party file server that supports the SMB2 file protocol, you might see a failure to connect. You may get different error messages depending on how youíre accessing the third-party file server. These might include:

When using a DIR command with a UNC path, you get an "Invalid Signature" error.
When executing a NET USE command, you see a message saying that "System error 2148073478 has occurred."
When attempting to browse the to the UNC path, you get a message saying that "an extended error has occurred".

This behavior may be due to the "Secure Negotiate" feature added to SMB 3.0 for Windows Server 2012 and for Windows 8, which relies on the correct signing of error responses by all SMB 2 servers (including those supporting only protocol versions 2.0 and 2.1). Some third-party file servers do not respond with a signed error response causing the connection to fail.


Resolution:
 Quote:
Contact the third-party file server vendor and request an update that will allow the file server to support Windows Server 2012 and Windows 8 clients.


Work Around:
 Quote:

Enable signing on the third-party file server.

Require signing on the SMB client or the SMB server by turning on the "RequireSecuritySignature" setting. See your vendorís documentation for instructions on setting signing to "required" on the vendorís SMB server.

You can enable signing using PowerShell on a Windows Server 2012 or Windows 8 client with this command:

Set-SmbClientConfiguration -RequireSecuritySignature $true
Disable "Secure Negotiate" on the client.
You can do this using PowerShell on a Windows Server 2012 or Windows 8 client, using the command:
Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters" RequireSecureNegotiate -Value 0 -Force
Note: The command as displayed above may wrap multiple lines in your web browser.



Top
#206034 - 12/10/17 03:03 PM Re: Windows 8 support [Re: Mart]
A_H Offline
Fresh Scripter

Registered: 09/07/09
Posts: 8
Loc: Austria
@PRODUCTTYPE in Kix4.63 now supports Windows 8 BUT is this behavior intended?


Here is the script (only one line as example):
"Used Kix-Version: " + @kix + " prints Producttype as: " + @producttype

And the Output on Windows 2008 R2 with different Kix-Versions:

Used Kix-Version: 4.61 prints Producttype as: Windows Server 2008 R2
Used Kix-Version: 4.62 prints Producttype as: Windows Server 2008 R2
Used Kix-Version: 4.63 prints Producttype as: Windows 6.1 / 3

Top
#206036 - 12/10/18 04:40 AM Re: Windows 8 support [Re: A_H]
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 01/06/05
Posts: 22294
Loc: Claremore, OK
no, that is a bug.
_________________________
!

download KiXnet

Top
#209284 - 14/07/22 10:15 AM Re: Windows 8 support [Re: Mart]
Slipknot1 Offline
Just in Town

Registered: 14/07/22
Posts: 1
Loc: NSW
Hi I have a question. I'd like to know whether the new version 464 supports Windows Server 2012 R2. I havent managed to get the right answer anywhere. Here's a scenario where the customer is using kixtart logon scripts with Windows 2003 Domain Controllers. We have recently upgraded them to Server 2012 R2 Domain Controllers. However the existing 2003 Domain Controllers are still in place. Looks like they are currently using Kix 411. Would i be able to upgrade Kix to a newer version to support Server 2012 R2 when we plan to decommission the older 2003 Servers? Please help..!! Very Urgent..!!
Top
#209287 - 14/07/22 01:42 PM Re: Windows 8 support [Re: Slipknot1]
Lonkero Administrator Offline
KiX Master Guru
*****

Registered: 01/06/05
Posts: 22294
Loc: Claremore, OK
411 should also work. Upgrade to 4.6 does bring improvements and should be done.

And if you actually cared to read this thread before posting in it, you already have had your answer \:\)


Edited by Lonkero (14/07/22 01:45 PM)
_________________________
!

download KiXnet

Top
Page 2 of 2 <12


Moderator:  ShaneEP, Arend_, Jochen, Radimus, Glenn Barnas, Allen, Mart 
Hop to:
Shout Box

Who's Online
1 registered (Shawn) and 90 anonymous users online.
Newest Members
B1GHawkeyes, GeoHamm, register, Marcus_Dunne, stuvwx656262
17397 Registered Users

Generated in 0.122 seconds in which 0.029 seconds were spent on a total of 14 queries. Zlib compression enabled.